Jump to content
SAU Community

Recommended Posts

there has been a fair bit of interest from some of the members on here after a S2 Dayz front bar and Dayz rear skirt, so Andrew at Custom Carbon Components ( http://www.ccubed.com.au ) has said that he can make a top quality copy of a genuine Dayz front bar and rear skirt! Rough prices are as follows

$550 S2 Dayz Front Bar

$300 Dayz Rear Skirt

basically the prices are higher than your "average" because Custom Carbon Components only offer the best products, best fit, made form superior products and second to none craftsmanship. also because they won’t be charging for tooling as these moulds haven’t been made yet.

Yunis has offered up his Dayz bits for this job - legend

Andrew needs at least 5 people with 50% deposits down before work can begin

PM me for those who are interested!

:blink:

Edited by Brycey

I don't know much about bodywork, but does that include painting? Does it need to be painted on the car, or can it be matched close enough off the car? Thanks

that price dosnt include painting, and the bar/skirt is painted when its off the car.

if you live outside of sydney or need the bar/skirt posted to you and want CCubed to paint the gear then you would probably need to send somethign like your fuel cap cover for colour matching

currently getting prices on paint

just a thaught guys can they do a mould of the rear bar with the skirt attatched and then smooth it out to get rid of the seam where the skirt joins.and is it possible to remove the numberplate frame setup in the front bar it would look better more airflow etc .my 2 cents worth if we going to all the trouble lets get it rite

post-26949-1189843672_thumb.jpg

post-26949-1189843781_thumb.jpg

why are u guys goin to all this trouble to get the dayz ones made up from scratch when there is already places making other (better in my opinion) kits ready to go, front, side and rear.. just my thought neway..

why are u guys goin to all this trouble to get the dayz ones made up from scratch when there is already places making other (better in my opinion) kits ready to go, front, side and rear.. just my thought neway..

ok here is my 2 cents worth and i know a few more people with the same outlook i like the dayz bar because. 1 its not too low. 2 because it still retains a semi factory look and not the boy racer apearance. 3 still has plenty of airflow well it will when the jap numberplate bit is removed .personally i would rather keep my car looking like stock as it dosent atract any unwanted attention from the boys in blue and all the boy racers trying to prove something everytime they see a kitted out car

why are u guys goin to all this trouble to get the dayz ones made up from scratch when there is already places making other (better in my opinion) kits ready to go, front, side and rear.. just my thought neway..

I just like the Dayz kit... think it looks more "Stageaish". :)

im pretty positive Andrew can remove the number plate holder/make it alot smaller

not sure about the chrome strips, either adapt your old one or... umm... hey look over there! *runs* :yucky:

still need more people for this to go ahead!

im pretty positive Andrew can remove the number plate holder/make it alot smaller

not sure about the chrome strips, either adapt your old one or... umm... hey look over there! *runs* :mellow:

still need more people for this to go ahead!

Hi Brycey,

Any word yet about paint costs?

Thanks

yeah mate just got some info then, he can paint the front bar + rear skirt for $600 if requested but if you don’t live local to sydney then he recommends getting it done at your local paint shop as the packaging will more than likely damage a freshly painted item - no matter how well its packaged.. so he can do it but he highly recommends getting it locally done if you don’t live in or around Sydney

4 :D

good old joe has put his hand up to be number one, and mike has said he will put some money down for the moulding (to get things happening) but wont pay the total amount till a later date

  • 2 weeks later...
  • 3 weeks later...
are these the sort that crack on impact? or will they be flexible like the quality/stock items?

Oooh, if they were made from flexible composite like some of the drift kits.... like the ones supplied by Flex-Fiber Duraflex or M-FleX, that would be extremely nice... In this case however I don't think the kit parts will be flex composite... not sure the process you'd need for what I'm guessing is a urethane/fiberglass composite item, but I'm guessing for a small number run like this it'd be far too expensive. Although it'd be cheaper than pure urethane parts, and stronger too.

  • 1 month later...
  • 3 weeks later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...