Jump to content
SAU Community

Recommended Posts

i done alot of searching and i can't find the answer.

anyway i need to know if a gtr front bumper will fit a series 1 r33.

do they fit both series 1 and 2 or are they meant for series 2.

i know the series 2 bar doesn't fit series 1 and so if the gtr bar is meant for series 2 it won't fit series 1

i don't know can some please help?

has any one done this?

my car is non turbo if that makes a difference

Link to comment
https://www.sau.com.au/forums/topic/184966-gtr-front-bumper-on-a-series-1-r33/
Share on other sites

If its an original gtr bar = NO

Just get a aftermarket gtr bar to suit.

yeah im looking at the aftermarket ones but will they fit both series 1 and 2 or not?

ive asked some people that are sellign them but they can't tell me.

has anyone got an aftermarket gtr bar on a series 1

cheers

yeah im looking at the aftermarket ones but will they fit both series 1 and 2 or not?

ive asked some people that are sellign them but they can't tell me.

has anyone got an aftermarket gtr bar on a series 1

cheers

i've got it on my series 1. i just replaced the 400r to gtr style front bar and if you mean gtr style front bar not genuine 1, of course it will fit..

Edited by BiAsA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
×
×
  • Create New...