Jump to content
SAU Community

Recommended Posts

AAArrrrrggghhh, I have lost my spare key (black hole somewhere) and I have been told that although Nissan can get a replacement key ($$$) I need to get it cut and coded somewhere else. Has this happened to anyone? and does anyone know of a place where I can get the key coded?

nissan should be able to do it. or any workshop with a decent scanner like the new modus snap on scanner or a launch. you dont have to replace the body control module like with the new falcons an magnas do ya?

All you need is the key code, it is on a little metal disc / plate with 5 digits.. you give that to the key man and he cuts it to that shape.. then you go to Nissan for a coding.. Coding is 55 Dollars at northside nissan

Thanks, The guy i talked to at magic nissan said that they couldn't do it, but it might just be that they haven't had to yet. I'll try northside. No key number on original, but it's good they can do it off the VIN.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...