Jump to content
SAU Community

Recommended Posts

hi. i am currently wrecking a complet R32gtst 4 door skyline. it has taken a bad hit in the drivers side door so most body panels on that side are stuffed.

the first list is of things that are avalible right now which will be updated over the weekend.

the seccond list will be what has already gone off the car. this is a briliant chance for any 4 door owner to get the rare parts that they are after.

pics will be added apon request and avalable time

AVALIBLE NOW:

R32 manual conversion pack. everything minus gearbox. (clutch, flywheel, peddals, master and slave cylenders, front half of tail shaft Gbox cross member) $450

HKS turbo timer with plug in R32 loom, in good condition, older style. $80

Left hand factory side skirt. $80 right hand got smashed pitty.

head light switch $80

indicator switch $80

dash cluster $80

manual suround around cluster $50

manual gear stick suround $70

Rear door trims. $50 each

Rear doors

boot lid with 2 holes for a spoiler.

complete rear subframe minus diff. can break down to individual pices.

right hand mirror $80

spare left and right mirror set $160

climate control unit $60

all 4 door boot lining $30

set of original skyline mats in top condition bar ware in drivers side one. $60

factory nissan tool kit with jack. missing tyre wrench. $60

standard wheel.

standard front rotors. need machining. $20

Factory nissan gear nob. needs a retrim. $50

centre console with excelent console lid. $60

Center A/C vent $70

LH A/C vent $60 both in excelent condition

complete dash. in pretty good condition.

silver GT badges $50

R32 radiator

HEAPS more to come......

PARTS GONE OR SOLD (just so i dont keep getting asked) and (some of this stuff is under offer so it may become avalible again)

engine complet

gearbox

diff

completre ABS system

headlights

left hand indicator, front guard, front door trim, mirror.

glove box

rear tail lights

sunroof

all seats

front bar

front calipers

LH lower control arm

and a few other things ill have to check on.

please contact me via pm or phone me on 0400 563 199 for faster response. i work 2 jobs as it is but i will try my best to be fast with replys and postage and please dont hesitate to ask for a part not listed. all parts are negotiable.

thanks damo oh and just check my trader rating if you have any worries.

exterior pics added just to basic colour and hape the car is in.

post-28089-1190542168_thumb.jpg

post-28089-1190542332_thumb.jpg

post-28089-1191712953_thumb.jpg

post-28089-1191712979_thumb.jpg

post-28089-1191712999_thumb.jpg

post-28089-1191713020_thumb.jpg

post-28089-1191713045_thumb.jpg

post-28089-1191713066_thumb.jpg

post-28089-1191713087_thumb.jpg

post-28089-1191713109_thumb.jpg

post-28089-1191713176_thumb.jpg

post-28089-1191713197_thumb.jpg

post-28089-1191713218_thumb.jpg

post-28089-1191713242_thumb.jpg

post-28089-1191713276_thumb.jpg

post-28089-1191713302_thumb.jpg

post-28089-1191713325_thumb.jpg

post-28089-1191713347_thumb.jpg

post-28089-1191713367_thumb.jpg

post-28089-1191713417_thumb.jpg

Edited by DJRIFT
Link to comment
https://www.sau.com.au/forums/topic/186107-wrecking-r32gts-t-4-door/
Share on other sites

if you can do $300 + delivery for manny conversion bits ill take it. that means i need everything apart from gearbox!!!!!!!!

that means a tailshaft as well which you havent included & rubber boot with metal base to bolt around the shifter.... etc etc

anyway pm sent dude!!!!!!!!

Edited by whyte

the car is grey in colour. not silver and not gun metal the grey in between.

also the front guard is under offer already but the front left door is ok.

thanks damo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...