Jump to content
SAU Community

Recommended Posts

Any one used this stuff yet?

Hey guys - this pigment comes with instructions and they also have instructions on Paint with Pearls site. We have painted numerous jobs and its good stuff for the price - just buy a GOOD quality clear - mix 1 pkt 1 ltr of clear . Don t forget your base coat and Metal flake if you want it . A GTR would take aboput 4 ltrs of paint once pigmented - so thats a few litres of primer - 2 litres of say silver metalic base coat then about 3 of pigmented clear. In between coates block it back then a final clear coat .

well i was look at the web site for that paint and where are these guys actual located...??

USA -Denvar Colarado - Pigment is cheap - Postage about $25 -here in a week - Mats good to deal with.Pay Pal

  • 2 weeks later...
  • 4 weeks later...
anyone know of similar sites located in aus??

nope - you could try a local painter - but its bound to be more expensive

heres the apple red flake from paint with pearl mixed in clear Powdercoat - definately need to clear over it and block if used in paint - where as the powdercoat is thicker and more self leveling.

IMG_0138small.jpg

  • 2 weeks later...

Here are a few pics that my friend took the other night of my to be drag GTR32 straight out of the booth - got lots to do yet. Looks a lttle funny being so

high off the ground as she has no running gear in her - will soon though!

Any way this is about painting your ride - will post up some pics in the natuarl sunlight as it will show the paint with pearl metal flakes better, there is one close up pic but dose not do it justice under fluorescent light. Enjoy.

I don't realy like busy paint jobs but that one looks very effective and not to full on .I admire the painters effort for sure and once finshed I bet it will look a millon dollars on the track

thanks i dont either for streeters- strip -why not i say, looks totally differant in sunlight.

  • 3 weeks later...

Im getting a blue paintjob soon, buying all the paint myself and prepping it then taking it to get sprayed.. Tried to look on the site just a bit unclear, how many packets would i need? about 4-5 since exXu1 said "A GTR would take aboput 4 ltrs of paint once pigmented", But what does it mean pigmented? Im talking from scratch.. Which packet would i get? Im looking for a GTR blue like bayside blue but with that pearl look..

Thanks

  • 2 weeks later...
Im getting a blue paintjob soon, buying all the paint myself and prepping it then taking it to get sprayed.. Tried to look on the site just a bit unclear, how many packets would i need? about 4-5 since exXu1 said "A GTR would take aboput 4 ltrs of paint once pigmented", But what does it mean pigmented? Im talking from scratch.. Which packet would i get? Im looking for a GTR blue like bayside blue but with that pearl look..

Thanks

The pigment is the small packet you buy from paint with Pearls- the pigment goes in your clear- you use clear only. When your pigment goes in the clear it becomes the paint colour you want. You then apply how many coates you want to achieve the look you like.

The pimented clears go over a base coat- say clear with a silver base or metalic even - contact Mat at P w Pearls and he will explain or i am sure ther are instructions on the site.

  • 1 month later...
  • 7 months later...

http://www.paintwithpearl.com/

basically like most pearls, it is a dry flake that is mixed with a base clear. this is then sprayed over the base colour of your choice. just like exXU1 said

the difference in teh styles is explained, but in a basic form, it is a differing of the size of the metallic pieces to change the effect the paint gives. my pics above are the flake, so large pieces are easily identified, where as a shimmer pearl is small pieces so it comes out as a colour change rather than flakey

wow this stuff is awsome, only one problem, there are way too many options!

how do i know what to go with to get the dezired affect?

some of the pictures look nothing like what you would expect from the description!

cheers

Gezza

  • 1 month later...

let me get my head round this, its been a long day

say for example my car is already silver....

I can buy say the blue satin ghost pearl flakes, mix with clear coat, and get my nearest panel shop to spray it and itll look sweet? the silver will have a pearlescent blue tinge in the light?

bout how much would the spray cost at the shop?

you still need to scuff the current paint back, then run the clear and additive, then another plain clear ontop again, then wet sanding and buffing if required.

best to go to your local painter and ask, Darwin prices might be different to other areas.

  • 1 month later...

looking at doing my car in the next month just started prepping it. although have slight prob with wat to do with the sunroof.( bit rusted out thinkin i will just get perspex and silicone it in or something. any opinions welcome. any way thinkin black pearl pigment with the black 00.4 flake sshould look sweet when im done anyone got any pics of cars they have done will post mine when completed.

Hi guys, For anyone wanting to paint they're car's them self. if you want a more in depth look you should consider adding the pearl powder/rainbow flake in binder then clear over the top. Be careful with the flakes too, Cause if you put it in with the clear it will leave the surface of the paint feeling like sand paper. make sure you use the right grade of paper when preping for colour. i recommend 800 grit for pearls and mettalics. and if your paint is in good condition ie not flaking or faded you wont have to prime it.

Hi guys, For anyone wanting to paint they're car's them self. if you want a more in depth look you should consider adding the pearl powder/rainbow flake in binder then clear over the top. Be careful with the flakes too, Cause if you put it in with the clear it will leave the surface of the paint feeling like sand paper. make sure you use the right grade of paper when preping for colour. i recommend 800 grit for pearls and mettalics. and if your paint is in good condition ie not flaking or faded you wont have to prime it.

If you realy are not sure and have limited experience - just search the correct way to apply or send Mat at paint with pearls an email, i am sure he will help, post the info here for all. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...