Jump to content
SAU Community

Sick Skyline

Shmee33

By Shmee33,
in General Maintenance

 Share

Recommended Posts

Shmee33 Rising Star

Shmee33

Posted
Posted

hey i have a skyline and i just had the turbo replaced.

i took it for a drive and i have a problem when i put my foot down a little or a lot the revs drop then it kickes in but it has bugger all power.

the old turbo arcked its self and alot of oil was everywhere also a little bit of smoke comes out of the exaust pipe but its raw fuel i belive

could it be the oxygen sensor?

catolic converter?

well i dont know can you please help me

thanks alex

Link to comment
https://www.sau.com.au/forums/topic/186937-sick-skyline/
Share on other sites
Shmee33 Rising Star

Shmee33

Posted
  • Author
Posted

well there is oil everywhere and i belive the intercooler is full of oil if i just spent one night with it and gave it the best clean all over or am i better off just getting all the other stuff done first?

Link to comment
https://www.sau.com.au/forums/topic/186937-sick-skyline/#findComment-3385011
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...