Jump to content
SAU Community

Recommended Posts

hey guys

just finished the following mods: 440cc inj, tomei fuel pump + fuel regulator, greddy emanage ultimate, prfect b. already have a cooler, pod, turbs back 3"exhaust. Am producing around 175kw. Looking at gettin more power without increasing the actual size of the turbo what would i go with next for more power? am open to high flowing but thats about it in the way of the turbo as i dont want it to stand out if being defected!

any ideas would be helpful and is this the amount of power youd expect with these mods?

cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/187102-new-mods-completedwhat-next/
Share on other sites

That is massive amounts of power out of a hyundai getz. :(

maybe you should update your cars section of you profile so that we know what you own and can better advise!!! :no:

lol...I have a getz aswell...dont bad the hyundai's...unless its an EXCEL!! :rofl:

Ryan

Not too sure what car you have, but i recently pulled 171kw at boostworx without larger injectors or a different ecu, would think you'd pull more than 4 extra kw with those mods but i could be wrong

On the cheap side, you can get a RB25 turbo, which is just slightly bigger than the 20 and it will look just like stock, remap the ECU and youll be around 190rwkw (at least I was)

Sell the emanage, to cover some of the costs, and enjoy!

Not too sure what car you have, but i recently pulled 171kw at boostworx without larger injectors or a different ecu, would think you'd pull more than 4 extra kw with those mods but i could be wrong

he has to be talking about an RB20 dude, why bother upgrading injectors and pump and regulator to get only 170kw. It has to be an old lazy RB20 :)

he has to be talking about an RB20 dude, why bother upgrading injectors and pump and regulator to get only 170kw. It has to be an old lazy RB20 :ninja:

i don't think the rb20 standard turbo can even handle 175 kw and last for more than a week. upgrading injectors and pump wont produce much more power unless you have the air flow to make it, like a bigger turbo. you'd be able to get a little bit out of it with the EMU but not that big of a step for the rb20 on a standard turbo.

looks like its a good base for a turbo upgrade. if your worried about a turbo upgrade getting unwanted attention then a high flow is definantly the go. you've already got the supporting mods to make some good power.

Edited by QWK32

thanks for the suggestions guys. Lol and and dont bag the hyundai. Nothing wrong with korean made cars......lol

as some of you have guessed, the car is an rb20. i like the sound of the new afm and high-flowed turbo. im guessin a z32 afm is legal still??

thanks for the suggestions guys. Lol and and dont bag the hyundai. Nothing wrong with korean made cars......lol

as some of you have guessed, the car is an rb20. i like the sound of the new afm and high-flowed turbo. im guessin a z32 afm is legal still??

if you want it to still look stock but go a fair bit harder, pick yourself up a forklift bottom end and chuck all your top end goodies on it.

that and a highflow will get you up around 230 / 250 kws, and still look like a stocker.

bottom ends can be had for around the $100 mark and then find yourself a second hand rb25 highflow from the fs section, and for $1000 you will gain 75 kws.

cheap power really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...