Jump to content
SAU Community

Recommended Posts

Hey All,

I need cash, so the missus has convinced me to sell the baby. It's only fair i guess seeming as how it sapped all the money in the first place. Goes like this.

1996 R33 Series 2 Gts-t

-5 speed manual

-112 xxx kms

-Resprayed by Candyman Spray Painting in Sydney in Jet Black

-Car gets regularly washed, polished and waxed using only top quality products

Brand New Engine Rebuild.

Consists of the following

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the man who built it. Car has only travelled 1500k's since the build and hasnt even had a run down the strip yet. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

271 RWKW @ 18Psi (very safe tune)

Others Mods etc:

•Genuine Gtr bodykit (obviously isnt a perfect fit with the gtst gaurds)

•Carbon Fibre reverse scoop bonnet sprayed with a clear coat (with bonnet pins)

•17 inch Volk EMU Racing rims resprayed in Black fitted with near new Hankook K104 255x40 (rear) Yokohama 235x45 (front)

•Tein height adjustable coilover suspension, hard but not uncomfortable

-Cusco Front Strut Brace

•DBA4000 slotted rotors front and rear

•DS2500 front brake pads, RACEBRAKES rear brake pads

•Cusco castor rods set to 8 degrees castor

•GFB Stealth Fx blow off valve (fully adjustable, can be fully closed)

•3inch split dump/front pipe into 3inch CATCO hi flow cat continues into 4inch through to 7inch cannon with 5inch fluted tip, also have a legal bolt on end muffler.

•Power FC & Hand Controller

•Apexi AVCR Boost Controller

•Apexi Turbo Timer

•Apexi boost gauge

•Apexi pod filter

•Twin thermo fan set-up with 1x12inch & 1x14inch fans

*New Battery

•Genuine C’s shortshift kit

•Aftermarket steering wheel, pedals and Gear Knob

*Nismo Clear Indicators

*Aluminium wheel nuts

•Stock diff re-shimmined

•Hybrid Tube & Fin 700x300x75 FMIC fitted

•Excedy 5 Puk Ceramic clutch with RPM brass button pressure plate

*New stereo inc, Alpine MP3/ Ipod Control Head Unit, Alpine V12 amp running 6 inch Kenwood splits in the front and a Soundstream SPL 12" sub.

There is more as well, but i think you get the idea by now, this car has everything you could ask for and will cost you

ALOT less to buy than what it cost me to buy and build.

Custom Plates SLO33R included in sale

$24,990 or near offer

call me on 0409 910 960 for any other questions you have.

post-3771-1191555778_thumb.jpgpost-3771-1191555756_thumb.jpg

attachment=122597:05_10_07_017_10_1.jpg]post-3771-1191555835_thumb.jpgpost-3771-1191555903_thumb.jpg

post-3771-1191555816_thumb.jpg

post-3771-1191555856_thumb.jpg

post-3771-1191555924_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/188053-96-r33-gts-t/
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...