Jump to content
SAU Community

Recommended Posts

Hey guys, at the moment im using the aerial cable as my earth for headunit, but now i want to use my aerial so where is the best nice and easy spot for new earth? I also want to run some of my guages to this earth also, Any ideas? Its for a R33 S2.

I have tried a couple spots around the bolts by the gearbox etc, no luck.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/188310-want-a-new-earth-for-headunit/
Share on other sites

Times three!

I sanded the metal ring part (after removal. Easy), stuck a bolt and washer over one hole, then sprayed the whole thing black gloss. Remove the bolt and washer, and you have a perfectly clean grounding point. Attach ground wire after re-installing it all and then spray or rub with some kind of lubricant (WD40, etc), which will stop the bare metal from rusting.

I tried the spot u three guys use, tested it with light n was ok the connected it up properly n for sum reason didnt work? I still duno y it didnt work.

Just to make sure we are talking about the same spot, one of the four bolts underneath the gearstick cover, beside the lower rubber part off stick?

make sure youve sanded back any paint that is at that point. bare metal is a good ground, paint is not :) by all means paint over it once grounded to stop rust. also make sure the ground wire from the head unit isnt dodgy. ive had one with a break in the ground wire before. would work randomly. replaced the ground wire at the plug - which wasnt fun :(

wire is all fine, dont think its an fuse problem as when i change back to my old earth it all good. Im really confused why when i test the point steve told me it shows its good, then I wire it up, none of the bolts can be earthed when i test with light. Its fine till i connected it lol. Then i take it off and that point is ok again :thumbsup:

I tried the spot u three guys use, tested it with light n was ok the connected it up properly n for sum reason didnt work? I still duno y it didnt work.

Just to make sure we are talking about the same spot, one of the four bolts underneath the gearstick cover, beside the lower rubber part off stick?

That quiet funny actually, because I wired up a head unit in my friends R32, and used the same grounding point as mine, which is the one were all referring too, and it didn't work either!

Very weird..

I just used one of the other screw holes that holds the rubber boot thing in place.

The mounting bracktes in the dash, to the left and right side of the head unit also work as an earth.

So i can use the earth point at the back of head unit then if i can earth to mounting brackets? I havent had a good look at it but i thought the brackets are all attached to plastic and not the body at all?

Yer... I probably wouldn't trust the brackets to be well grounded actually.

Failing the rubber boot surround bit, perhaps go for something around your handbrake? Removing the entire centre console at the point you are now is just a few extra screws.

Yea i had all that off aswell fitting switches in my console box. Il have a play around the handbreak in the weekend, I did try what Hellfire said at start but i had trouble geting dam footrest off, is there more than just 2 screws or what?

Also what is that thing underneath the console box? behind the handbreak a lil bit. Is that something to do with the airbags?

Oh i see, yea i took the front 2 off and couldnt get the footrest off so i tried hookin earthcable up to one of them bolts lol no gud, how does the foot rest come off? i used a bit of force but also didnt wana break it lol im gud at that haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...