Jump to content
SAU Community

Recommended Posts

Yeah man still got original injectors in there and still have to get remap from jeff from turbo tune. That was running at 12 psi but as adrian said I'll wind it up to 14 pound for the next dyno run and while he does the remap so i feel a little safer. I was just curious what i was running so i got a printout.

sounds good scott......just be carefull if you're planning on running 1bar boost on ceramic wheels......it's not the the turbo dying that you have to worry about but the bits they may find their way into the combustion chambers :thumbsup:

SLED,

Its only the 26's that have the issues with sucking ceramic back in to the motor. :banana:

Providing EGT's are kept in check with a good tune and no track days 14psi is all good on the stocker rb20 turbo.

---

There will be bugger all increase in peak power going from 12-14psi; its the mid range that will sit up and feel alive; transform the whole car in comparison. :thumbsup:

very impressed with my car through the hills last night, Stayed in forth 90% of the time with fantastic low down pick up, Pulls like a f*kn freight train considering the shitty tune. Very loose in the arse end. Ii want a GTR! I used about 30 litres of fuel in about an hour LOL! Once again, EBC greenstuff are fantastic.

Edited by Ryanrb25
very impressed with my car through the hills last night, Stayed in forth 90% of the time with fantastic low down pick up, Pulls like a f*kn freight train considering the shitty tune. Very loose in the arse end. Ii want a GTR! I used about 30 litres of fuel in about an hour LOL!

I hear ya Ryan.....mine wasn't too bad in that department when I did the hills run with my mates 4WD Porsche & Maserati but I double hear ya on the fuel issue!!

yea flat 10.2:1 AFR's arent good for economy.

Was considering putting 3540 on the 25 to crack some big numbers but response like 14psi at 2000rpm is great for those exits.

adrian, sorry to lead you in the wrong direction on the way home hahahaha...lucky i realised when i did!

Edited by Ryanrb25
ahhh ok....I thought they had ceramic wheels too

They do :thumbsup:

For what ever reason the RB26's suck the ceramic back in to the motor where as the single turbo's never do. Most likely a little to do with manifold design and possibly cams.

yea flat 10.2:1 AFR's arent good for economy.

Was considering putting 3540 on the 25 to crack some big numbers but response like 14psi at 2000rpm is great for those exits.

adrian, sorry to lead you in the wrong direction on the way home hahahaha...lucky i realised when i did!

At 2k? :banana: Thats better than mine; got dyno sheet?

Mine makes an 1psi off idle; by 2000rpm its around 4psi, 2500rpm 8psi and 3000rpm 19+psi.

?? did you come across police

who got defected tonight on our hills run??

wasnt luke was it? hmmm...

they are but they dont get sucked in the motor Joel is saying

ahhh ok....I thought they had ceramic wheels too
They do :thumbsup:

For what ever reason the RB26's suck the ceramic back in to the motor where as the single turbo's never do. Most likely a little to do with manifold design and possibly cams.

thats wierd isn't it....I wonder if that's more the exception than the rule....what happens to the bits when they do fly apart then?

One theory could be that due to the cam overlap the bits make their way through the inlet then straight out of the exh valve before the bits get combusted.....poor cats if that is the case!

Just to clear up, Dan (Inline_6) got pulled over at the end of our cruise last night, but the cop just pulled a skyline over for the hell of it coz her boyfriend is on SAU! No defects, no inspection. Was a good night tho, i DEFINATELY need some better light globes, just cant see sweet FA without highbeams.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...