Jump to content
SAU Community

Recommended Posts

so i just dropped an alan key im between the plenum and head..... i cant see it and i cant get it to drop out by moving the car backwards and forwards.....

wtf do i do????

the only thing i can think out it getting in the way of is the throttle body but its past that... is there anything else it could get in the way of?

well i think ive fixed my other problem, 1 of the blow off valves had a torn vacum hose.... cut the end off and reatached, hopefully its done the job.

but now im to scared to drive it becoz of that f*ken alan key.....

HAHA thats lame as... better hose clamp maybe?

im hoping the alan key will just dissapear..... and maybe ill learn to fly...... o ffs wtf!

it surely cant f*k anything else up.....

can it?

somebody just say no so i can sleep tonight.

by definition aren't all hookers underpaid

Haha everyone hateses me!!! lol. First Adrian, then Damo (hes ok now...hes coming on my cruise :D) and now you.

WAAAAAHHHHH!!!

Ok im over it :P

Being sick sucks like an underpaid hooker :D

who is making that one 450hp is 335kw mine is rated to about 360hp about 270kw @ 25psi

do u know how much its rated too?

im looking at a 450hp hiflow..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...