Jump to content
SAU Community

Recommended Posts

haha, boy did the main page get a clean up once Andrew logged on
what i miss pc has been stuffed so havnt been on, just at uni now :(

I might have cleaned up a bit :) .... yes the number of useless/repost/wrong section threads seems to be increasing .... might be time for me to sticky another rant ;)

i wouldnt recommend going 6x9's in a skyline unless u plan on not running a sub. 6.5ichs will give u alot clearer sound and maybe like one sub in the boot will do. Depends what u like.

i wouldnt recommend going 6x9's in a skyline unless u plan on not running a sub. 6.5ichs will give u alot clearer sound and maybe like one sub in the boot will do. Depends what u like.

thats why ive got 6x9s in the back and 6" in the doors

plenty bass for what i want , i had a 5 amp 3 sub system in my commodore , im over it haha

heres a quick snap:

post-16018-1223548228_thumb.jpg

might be able to mount them vertically/diagonally or something...

i've got fusion 6.5"s under the stocko covers but one of em is blown and vibrates/sounds like shite. been meaning to replace em for years

yeah you could easily work around that man ,

if your going to make a new parcel shelf then youd have to use thin wood and use the current one as a template for the strut brace

agreed, subs FTL. 6x9s + a good set of 6 inches in the door is all you need for a nice clear sound.

im gonna amp my speakers when ive got the money

all my speakers are 300w each so will sound better with an amp imo

im sure you could work around it couldnt you ?

heres a quick snap:

post-16018-1223548228_thumb.jpg

might be able to mount them vertically/diagonally or something...

i've got fusion 6.5"s under the stocko covers but one of em is blown and vibrates/sounds like shite. been meaning to replace em for years

I might have cleaned up a bit ;) .... yes the number of useless/repost/wrong section threads seems to be increasing .... might be time for me to sticky another rant :(

yep, go for a sticky rant i rkn. I mean, im a whore, i admit that, but i always shoot my questions through the wasteland, well most of the time.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...