Jump to content
SAU Community

Recommended Posts

I got a good mate of mine that could help you out Pete, i'll give him a call tomorrow.

yes please Chad :P

Pete, told you I can get you gyprock if you like at a nice cheap price. If you're interested, SMS me and I'll get in touch with my mate :)

thanks Luke, I did remember you.

I may be able to get the material cheap through a builder mate of mine (possibly uses CSR) but I just need a hand to do the work.....happy to pay.

Speakin of jobs, I love mine! Average around $800-$1000 weekly, freebies.. bonuses, commision, and relaxed as place to work!

Oh and guy, we have a plumber we recommend, can sms you his number tommorow if u want? Best mates with one of the workers, so does a good job if you saw we sent you!

otherwise you get a subpar job and you have to keep calling him out :);)

i also have a dyno printout thats shows i have 274rwkw and one that says 229rwkw, with no changes to the car at all just different dyno's, but my PFC says they are at 100%, so i have no idea what power reading to believe. Cant wait till saturday so i can see what the boostworks dyno says :P

yeah will be good to run against more of your peers, i was always dubious of your claimed power reading when me and Jenkies drove next to you before he had all that work done

yeah will be interesting.. What boost are u running again?

Usually it takes a good 15psi to crack 240rwkw on stock turbo's on Boostworks dyno.

260rwkw @ 15psi with cams.

Shauns dyno used to read around 10-15rwkw lower than mainlines depending on who straps it down. I'll be there on Sat but unfortunately not running. Too busy with work and cant get down to MTQ to pick up bits to fix the car. :(

ah spewn still dont get to see the sleeper on the dyno :D

***keeps typing fingers away from the$100 formal drive thingy, that thread is gonna get nasty lol***

i lol'd

Guy, what do you need done? I know a plumber (name is Adolf, lol) and he may be able to help. Did the plumbing on my bosses house down in Normanville if you are interested
Oh and guy, we have a plumber we recommend, can sms you his number tommorow if u want? Best mates with one of the workers, so does a good job if you saw we sent you!

I am building my house at Inglewood, but its been held up by 2 yrs thanks to council. The budget is very stretched (thanks to an additional yrs mortgage repayments and ever increasing prices) so I am looking for some traidies that will do cash jobs (with me doing much of the grunt work if possible). I have the underfloor plumbing done but will need to do hot and cold water plumbing next (lay 20mm Rehau hot and cold pipe, fit all noggins etc)

I have nearly got my builders licence (Site Supervisor and Contractors licence) and have had experience as a labourer for many trades, so I am attempting as much as possible myself and leaving the jobs I know I cant do to the professionals.

Can also pay in meals and booze LOL

Edited by 4door_Sleeper

lol, I've seen this come up a couple of times now whilst trolling through the main For Sale thread.

Whatever you do, never ever buy any kind of block that has been bored unless it comes with the pistons that it was bored to suit.

So many blocks for sale that have been "freshly bored" but don't come with pistons..........pistons can vary by up to .005" or more between manufacturers and even more between cast & forgies.

If you buy a block that's been bored for cast pistons and you use forged pistons (unless the forgies have clearance already built into them) you're asking for nightmares.

Forgies require more clearance than cast pistons due to heat growth.

Not only that.........you don't know who did the final hone, what stone or paper they used, and what degree cross hatch was used.

Buy pistons first, give them to the guy on the boring barr and bore to suit them with a torque plate!!

lol, I've seen this come up a couple of times now whilst trolling through the main For Sale thread.

Whatever you do, never ever buy any kind of block that has been bored unless it comes with the pistons that it was bored to suit.

So many blocks for sale that have been "freshly bored" but don't come with pistons..........pistons can vary by up to .005" or more between manufacturers and even more between cast & forgies.

If you buy a block that's been bored for cast pistons and you use forged pistons (unless the forgies have clearance already built into them) you're asking for nightmares.

Forgies require more clearance than cast pistons due to heat growth.

Not only that.........you don't know who did the final hone, what stone or paper they used, and what degree cross hatch was used.

Buy pistons first, give them to the guy on the boring barr and bore to suit them with a torque plate!!

right on!

more people getting packages....and just got an email from someone from GMH saying in the first 1/4 of next year their shutting down for 22 working days!! YIKES!!!!

Penny its probably split and i'd guess that its a press in/press out job?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...