Jump to content
SAU Community

Recommended Posts

IMO, George Bush and his public speaking will be sorely missed.

'The vast majority of our imports come from outside the country.'

- George W. Bush

'If we don't succeed, we run the risk of failure.'

- George W. Bush

'One word sums up probably the responsibility of any Governor, and that one word is 'to be prepared'.'

-George W. Bush

'I have made good judgments in the past. I have made good judgments in the future.'

- George W. Bush

'The future will be better tomorrow.'

- George W. Bush

'We're going to have the best educated American people in the world.'

- George W. Bush

'I stand by all the misstatements that I've made.'

- George W Bush

'We have a firm commitment to NATO, we are a part of NATO. We have a firm commitment to Europe. We are a part of Europe '

- George W. Bush

'Public speaking is very easy.'

- George W. Bush

'A low voter turnout is an indication of fewer people going to the polls.'

- George W. Bush

'I have opinions of my own -- strong opinions -- but I don't always agree with them.'

-George Bush

'We are ready for any unforeseen event that may or may not occur.'

- George W. Bush

'For NASA, space is still a high priority.'

-George W. Bush

'Quite frankly, teachers are the only profession that teach our children.'

-George W. Bush

'It isn't pollution that's harming the environment. It's the impurities in our air and water that are doing it.'

- George W. Bush

Nice find Damo

OMG ... Pete has turned into an caravan touring old man! :blink:

Would you like some tea with your scones while you watch the campers roll by? :P

Haha, you're a funny boy........I've been touring in a caravan for 5 years, nothing has changed bud......time to cut back on work and live a little!

Will eventually get into a '94 V-Spec 32 if I can find a mint one.

anyone want a slab of piss (or cash adjustment) to take my injectors out? i went thru the hassle last time so cbf doin it again, got em supposedly fixed and now there still leaking, so have to take em back to the workshop.

Edited by rhys5169

Pete:

My dad recently bought a 200 series cruiser GXL also (TTV8D), nice car! Fuel consumption isn't as great as toyota lead you to believe, BUT your right, enough torque to pull a house down :P

When pulling his 2T (fully loaded) camper trailer around NT/QLD mid last year he was averaging about 18L/100 from memory, whereas unloaded he would get about 12L/100. That was sitting on Highway speeds whenever possible, and more often than not 80+ on the dirt "highways".

Nice cars though :P

Pete, a few pages back, I managed to find a heap of 32 GTR's (not V-spec's) but they had genuine 30,000k's and stuff like that on them... basically garaged for years! They were going for about 25-30k.

It wouldn't be hard to find a mint condition one! There's still plenty left in Japan. You just need to fork out a bit for them.

Rhys, with your injectors, did you just replace the O ring? The actual injector might be split (happened with mine)

supposedly they where all looked over, cleaned, seals replaced and tested. but i dont belive this for a number of reasons

Damo & Chronic, nice finds boys but I won't even look at a GTR unless it's a V-Spec and mint late model V-Specs are indeed rare.

Pete:

My dad recently bought a 200 series cruiser GXL also (TTV8D), nice car! Fuel consumption isn't as great as toyota lead you to believe, BUT your right, enough torque to pull a house down :)

When pulling his 2T (fully loaded) camper trailer around NT/QLD mid last year he was averaging about 18L/100 from memory, whereas unloaded he would get about 12L/100. That was sitting on Highway speeds whenever possible, and more often than not 80+ on the dirt "highways".

Nice cars though :)

yeah I drove my VZ Berlina to Melbourne and left it at the Toyota dealer then drove the 200 back........at highway speeds I got 10.5L/100.........will be interesting to see how it goes towing 2.5 tonne.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...