Jump to content
SAU Community

Recommended Posts

I am getting an alarm installed with twin immobiliser for my r33 skyline. The installer seems to think he cannont install the alarm/immobiliser with the turbo timer. Has anyone done this themselves? or know how to do it? Please advise me on this so i might be able to advise them.

He said it had to do with the alarm and australian standards.

thanks

Link to comment
https://www.sau.com.au/forums/topic/18849-alarm-with-turbo-timer/
Share on other sites

I have a HKS type 1 turbo timer with my alarm/immobiliser and they work fine together. I didn't do the wiring myself but I know it has been done via a relay, so when you turn the key off the alarm recognise that and the engine keep running off the turbo timer. There are no security issues because you are not bypassing anything just separating the two devices with the relay.

I have heard that some alarms either have provision for a timer, or inbuilt timers. If not it can be done via a relay as mine has been done.

Sorry I can't tell you exactly how the wiring is done, as I got it done by the guy who did my stereo install. I had been told by a few people that it couldn't be done also till I came across this guy. He just said alot of guys aren't aware how its done because it isn't that common, and that most guys that do these installs aren't true auto electricans.

Dunno how much truth there is in that, all I know is that mine now works and I can't fault any of the work he did. It is all quality, tidy work.

firstly, you cannot have the feature whereby the doors unlock when the engine dies

secondly, you need a bypass chip that allows u to look your car and immobilise after the engine dies. the chip cost me 38 bucks to add on to my pre-existing alarm.

send it to the shop that fitted your alarm and if the seem incompetent, send to another agent that does the same type of alarms :) hope that helps

firstly, you cannot have the feature whereby the doors unlock when the engine dies

yes this is true however you can have it so when you turn the key and pull it out the doors unlock then the turbo timer counts down. then you get out and lock the car via remote and the alarm arms. well thats my car anyways. oh and when you turn the car on both doors automatically lock.. pretty cool.

also when my car is being run via the turbo timer and you lower the handbrake it cuts out

as long as the immoboliser is not wiered to the fuel pomp the car will still run upn till the timer shuts down most ov the time thay cill the egnishon so theat u cant start it and when the hand brake is let down the car will stall and u cant start it with out the remote the key less entery shoud b abell to lock the car and armit if this is dun

this is what mine does.

i start boosting warhhhhh pshhhh pshhh ect you get the idear.

see some hot chicks, pull over.

decide im so cool that i turn off my ignition.

my blitz turbo timer kicks in, set for 1min or there abouts.

if i dont lock my car the imobiliser automaticlly sets after 30secconds.

if i lock the car the imobiliser is armed and the car is locked.

if i was to be in the car and locked myself in (which i tried) and put the key back in and try start it, the car turns off alarm sirens.

then my cars all locked, i go talk to da hot chix.

and all is cool.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...