Jump to content
SAU Community

Recommended Posts

hi guys, i have a R33 Series 1 GTS-T for wrecking.

Wrecking due to cannot get compliance. Rust in many areas., mostly body.

ALL PRICE HAS BEEN DROPPED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Tosaki Front mount Intercooler no piping $200

Blistein Suspenision $500

4inch ,massive Unknow jap brand exhuast dump pipe back straight through no cat flared tip loud as $300

rear diff includes cradle$350

Front disk $140 pair

altenator $150

window motors $150 each

cluster $150

Dash main concole $200

Door trims $100 each

radiator bottle $50

washer bottle $50

rear bar $150

rear lights $200 pair

boot lid $200

Passenger Seat $120

rear seat $150

rear window $300

front window $300

side windows $150each

3/4 windows $150 each

Bare doors $200 each

Aircon system $150

sport wheel & boss kit $120

5pieces carpet $80

bonnet $200

front hubs $150 pair

rear hubs $150 pair

side mirrors $80 each

radiator $100

driver foot fuse box $50

engine fuse box $50

fuse box in rear $60

steering arms with rack $150pair

power steering bottle $40

lower control arms $140 pair

starter motor $80

HKS pod filter with adapter $100

rear strut brace $150 each

Rear upper Strut Brace Nismo $150

seat belt and buckle all 5 $100 or $20 each set

R34 GAB Prosso coilover almost new only done 500km's no leaks height & 4damping adjust $850

more parts soon.

just ask for anyother things you need and i'll give you a price thanks for looking

Location (melb doncaster east)

post-40392-1191892610_thumb.jpg

post-40392-1191892616_thumb.jpg

post-40392-1191975258_thumb.jpg

post-40392-1191975484_thumb.jpg

post-40392-1191975609_thumb.jpg

post-40392-1192248163_thumb.jpg

post-40392-1192448809_thumb.jpg

post-40392-1192448838_thumb.jpg

post-40392-1192448856_thumb.jpg

post-40392-1192448881_thumb.jpg

post-40392-1192859702_thumb.jpg

post-40392-1192859716_thumb.jpg

post-40392-1192859729_thumb.jpg

post-40392-1192859737_thumb.jpg

post-40392-1192859744_thumb.jpg

post-40392-1192859757_thumb.jpg

post-40392-1192859766_thumb.jpg

post-40392-1192859785_thumb.jpg

Edited by JYspec
  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

wat exhaust system does it have???

and how much for the wheels?

Exhuast: don't know the brand, its cat back very loud flared out tip i think its jap, $450

Rims $850

where in melbourne are ya? mind if i come downa dnpick the things i want? cant seem tot hink of anythign at the top of my head but something will interest me

what brand front strut brace??? be happy to grab it off you for 120. im around the corner in Eltham

cheers

Edited by jake33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...