Jump to content
SAU Community

Recommended Posts

Honda CB250N 1980 model, girlfriend has decided to update to something more modern.

bike has been painted in same colour as BA falcon xr8 metallic blue, have fitted new tyres and brakes all round,new battery and head light globe, new muffler on one side as was corroded at link pipe end, as a result center collector was removed and cleaned out and had a new bell mouth welded on to reconnect muffler, have also fitted a ventura rack and rails.

i have a heap of spare parts for this bike including a new set of o-ring chain and sprockets,a couple of workshop manuals and also a parts cd that outlines all the part numbers etc.,other spares include a set of carbies and reco kit to suit carbs, head and base gasket set, and also a spare rear seat cowling.

i reckon if i had a dig around in the shed i would probably find some more stuff for the bike too.

bike is registered until late feb of 2008 and will come with a roadworthy certificate if req'd.

asking $1200 o.n.o with roadworthy.

see photo attached, if would like more pics please pm me and can send you some

contact me via pm or if you wanna ask any questions please call me on

0417151262 daniel

post-26133-1192507164_thumb.jpg

Edited by oxford1327
Link to comment
https://www.sau.com.au/forums/topic/189475-for-sale/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...