Jump to content
SAU Community

Recommended Posts

3.jpg

PictureCeffy1.jpg

rims.jpg

2005_0104Image0011.jpg

Driveline:

RB20DET

RB25DET gearbox

OS Twin plate & light weight flywheel

2-Way LSD

HKS T04e

HKS cast manifold

HKS 38mm external gate with screamer

Wolf 3D v4 ECU

Blitz stainless air filter

Custom stainless crossover & turbo outlet pipes

Loud in tank pump

GTR injectors

GTR intercooler

Trust Type R BOV

RSR* exhaust

Splitfire coil packs

Modified rad support housing triple core TR's radiator

Twin thermo's (tempreture controlled via ecu)

ARC oil cooler + Grex filter relocation

Sard header tank

Cusco oil breather

Suspension/Handling:

Seam welded

GET coilovers with camber tops

Tein castor rods

Cusco rear upper arms

Cusco rear swaybar

Rear traction rods

Welded rear strut brace

Non HICAS cradle

Alloy cradle bushes

Alloy steering spacer

5 stud conversion

Interior:

Thrash style fixed back seat

Rare Abarth leather wheel

Omori Oil pressure, Omori water temp, Greddy oil temp, Blitz boost gauges in custom dash panel

Profec-A EBC

Exterior:

Pearl blue paint

Missile front bar (missing lip)

Insurance DIANA skirts and rear bar

Yanack bonnet vent

Bolt-on flares smoothed over

Late model front/rear lights and grill

Stich Evolution 18x10 +18 front, 18x11 -1 rear

Falken Azenis ST115 tyres with good tread

Other stuff:

Factory sunroof

Fully rebuilt tailshaft

Jap workshop & club stickers

Bad bits:

Uncomplied, 15 yr import approval will be supplied.

Guards could do with attention.

Clutch isn't disengaging fully. This started happening straight after new engine was installed. Suspect snapped release pivot which is a cheap replacement.

Only on basic tune atm. 220 rwhp on 9 psi. No where near turbo's efficiency.

$10500 FIRM. Very unique vehicle. As far as I know the only Cefiro in Aus with Insurance skirts and/or rear bar. In saying that don't expect show quality body and paint, it's a pig.

[email protected]

0415291321

Edited by D-limo
Link to comment
https://www.sau.com.au/forums/topic/189641-fs-jap-spec-cefiro/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

All work done in Japan. Tokage can get them not sure if they are the same size might be a bit smaller. Or Yahoo auctions. It's a mission though if you still want the rear doors to open like mine. Your guards are pumped and hot already aren't they?... Just find some good offsets and it will be sex.

  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 4 weeks later...
i cannot beleive nobody's bought this??

it's so cheap it'd make a WICKED race car...

I think the non compliance issue is scaring people away.. $800 and a bit of effort and you have an off tap street car.

At this price it doesn't worry me too much if it doesn't sell. I just wish if it does, it be sooner rather than later :blush:

so cheap and so tempting...

you know u wanna!, you miss the ceffy chassis?

this is one cefiro that could pull off uras aero.

10k is a bargin...i dont have 10k :D

+1 :banana::D

I think the non compliance issue is scaring people away.. $800 and a bit of effort and you have an off tap street car.

At this price it doesn't worry me too much if it doesn't sell. I just wish if it does, it be sooner rather than later :D

just the wrong time of year to sell i think mate, nice car though, id own it if i had the $$ . also i think t04z and rb20 scare people off too tbh, is it laggy?

my mates got a T04Z on his RB20 with tomei cams and makes fullboost around 5k, but man does it hit hard, sounds nuts too. just rb25 the farker, use the same turbo, wack some uras aero on it, smash it on the ground, then drift the shite out of it. done and DONE.

sooo...whos got 10k to lend? :thumbsup:

It's a T04E from ye old school.. Starts spooling just before 4k. Screamer sounds fantastic at low boost...From what I've gathered turbo is rated at about 500-520hp.

Sorry but Diana owns Uras :thumbsup: In person the lines just look sex. She's JDM low already too :P

The only other Cefiro in the country with similar guards is the purple one running the RB26 that appeared in HPI.. That car got wrecked when they fitted Uras IMO

Edited by D-limo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...