Jump to content
SAU Community

Recommended Posts

3.jpg

PictureCeffy1.jpg

rims.jpg

2005_0104Image0011.jpg

Driveline:

RB20DET

RB25DET gearbox

OS Twin plate & light weight flywheel

2-Way LSD

HKS T04e

HKS cast manifold

HKS 38mm external gate with screamer

Wolf 3D v4 ECU

Blitz stainless air filter

Custom stainless crossover & turbo outlet pipes

Loud in tank pump

GTR injectors

GTR intercooler

Trust Type R BOV

RSR* exhaust

Splitfire coil packs

Modified rad support housing triple core TR's radiator

Twin thermo's (tempreture controlled via ecu)

ARC oil cooler + Grex filter relocation

Sard header tank

Cusco oil breather

Suspension/Handling:

Seam welded

GET coilovers with camber tops

Tein castor rods

Cusco rear upper arms

Cusco rear swaybar

Rear traction rods

Welded rear strut brace

Non HICAS cradle

Alloy cradle bushes

Alloy steering spacer

5 stud conversion

Interior:

Thrash style fixed back seat

Rare Abarth leather wheel

Omori Oil pressure, Omori water temp, Greddy oil temp, Blitz boost gauges in custom dash panel

Profec-A EBC

Exterior:

Pearl blue paint

Missile front bar (missing lip)

Insurance DIANA skirts and rear bar

Yanack bonnet vent

Bolt-on flares smoothed over

Late model front/rear lights and grill

Stich Evolution 18x10 +18 front, 18x11 -1 rear

Falken Azenis ST115 tyres with good tread

Other stuff:

Factory sunroof

Fully rebuilt tailshaft

Jap workshop & club stickers

Bad bits:

Uncomplied, 15 yr import approval will be supplied.

Guards could do with attention.

Clutch isn't disengaging fully. This started happening straight after new engine was installed. Suspect snapped release pivot which is a cheap replacement.

Only on basic tune atm. 220 rwhp on 9 psi. No where near turbo's efficiency.

$10500 FIRM. Very unique vehicle. As far as I know the only Cefiro in Aus with Insurance skirts and/or rear bar. In saying that don't expect show quality body and paint, it's a pig.

[email protected]

0415291321

Edited by D-limo
Link to comment
https://www.sau.com.au/forums/topic/189641-fs-jap-spec-cefiro/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

All work done in Japan. Tokage can get them not sure if they are the same size might be a bit smaller. Or Yahoo auctions. It's a mission though if you still want the rear doors to open like mine. Your guards are pumped and hot already aren't they?... Just find some good offsets and it will be sex.

  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 4 weeks later...
i cannot beleive nobody's bought this??

it's so cheap it'd make a WICKED race car...

I think the non compliance issue is scaring people away.. $800 and a bit of effort and you have an off tap street car.

At this price it doesn't worry me too much if it doesn't sell. I just wish if it does, it be sooner rather than later :blush:

so cheap and so tempting...

you know u wanna!, you miss the ceffy chassis?

this is one cefiro that could pull off uras aero.

10k is a bargin...i dont have 10k :D

+1 :banana::D

I think the non compliance issue is scaring people away.. $800 and a bit of effort and you have an off tap street car.

At this price it doesn't worry me too much if it doesn't sell. I just wish if it does, it be sooner rather than later :D

just the wrong time of year to sell i think mate, nice car though, id own it if i had the $$ . also i think t04z and rb20 scare people off too tbh, is it laggy?

my mates got a T04Z on his RB20 with tomei cams and makes fullboost around 5k, but man does it hit hard, sounds nuts too. just rb25 the farker, use the same turbo, wack some uras aero on it, smash it on the ground, then drift the shite out of it. done and DONE.

sooo...whos got 10k to lend? :thumbsup:

It's a T04E from ye old school.. Starts spooling just before 4k. Screamer sounds fantastic at low boost...From what I've gathered turbo is rated at about 500-520hp.

Sorry but Diana owns Uras :thumbsup: In person the lines just look sex. She's JDM low already too :P

The only other Cefiro in the country with similar guards is the purple one running the RB26 that appeared in HPI.. That car got wrecked when they fitted Uras IMO

Edited by D-limo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...