Jump to content
SAU Community

Recommended Posts

Ok, just after the standard power output in the series 1 R33 GTS. And what year does the series 1 R33 range from? 93--?

Would be good if someone could make it clear for me the stock engine output in kw, and than the stock rwk and torque.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/189988-r33-gts-na-stock-power/
Share on other sites

there's a sticky at the top of the forum, try that maybe?

or even google, it's really not too hard to find information.

here's a link to get started: http://www.skylinesaustralia.com/forums/t138169.html

can we close the thread now?

ok ok, felt bad here are some of specs

Nissan Skyline R33 GTS

Years 93-98

Engine 2.5 DOHC 24V 6cyl

Format RWD

Weight 1270kg

Power 96Kw

Torque 172NM

0-00km/h ***

1/4 mile ***

Transmission 5 Spd/4 Spd auto

Suspension multi-link

Brakes Vented Discs

  • 2 weeks later...

I have a modified R33 GTS-T ... I dragged a R33 NA Skyline once... I won, but boy, he was like on me the whole time... do the proper mods, N/A power is reliable power that's raw all the way...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...