Jump to content
SAU Community

Tial Wastegate Issues

Mushroom

By Mushroom,
in Engines & Forced Induction

 Share

Recommended Posts

Mushroom Veteran

Mushroom

Posted
Posted

Hey Guys,

I have an older Tial wastegate and I am trying to find the gasget that goes between it and the manifold. Now I have been told it should have a raised beveled edge on it to help seal it but have been unable to find one can anyone help??? A workshop has been looking but so far have been unsuccesful at locating one and can only offer purchasing a new one.

As the wastegate works fine and I really don't want to have to buy a new wastegate if I don't have to.

Cheers

Mushroom

Link to comment
https://www.sau.com.au/forums/topic/190489-tial-wastegate-issues/
Share on other sites
lineskee 33 Community Regular

lineskee 33

Posted
Posted

were you after that metal ring that goes into the end of wastegate or and actual gasket? if its the gasket im thinking of you can buy them from autobarn. turbosmart make 38mm sized ones, not sure bout other sizes tho.

Mushroom Veteran

Mushroom

Posted
  • Author
Posted

well it bolts on to the manifold which is flat and has 4 bolt holes, so I am thinking there is suppose to be a gasget that stis between them and has a raised beveled edge to help seal it . I will take some photos later this week to expalin more if it helps

Craved Grand Master

Craved

Posted
Posted

does the wastegate have the seat area machined out ???

tial-hw-wg38wseat_m.jpg

as you can see the samll ring that inserts into the flange area between the gate and the manifold .. is this the bit you are missing?

try to speak with tial USA and see if can get that part seperate from them. as that ring seals the valve to the sides so it doesnt leak

Craved Grand Master

Craved

Posted
Posted

yeah, no chance of goo working there

either have a replacement machined up on a lathe

OR

buy a new one from tial USA - or try Slide as he got my tial from japan and might be able to get the individual part

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...