Jump to content
SAU Community

Recommended Posts

Hey Guys...

If anyone knows of an rb20det package (engine, box, loom, ecu...) for sale locally in the next little while (very soon) please let me know.

Would perfer locally but very close to getting one from jap and waiting...

Cheers,

Todd

Link to comment
https://www.sau.com.au/forums/topic/191647-wanted-rb20det-engine-package/
Share on other sites

Hey Guys...

If anyone knows of an rb20det package (engine, box, loom, ecu...) for sale locally in the next little while (very soon) please let me know.

Would perfer locally but very close to getting one from jap and waiting...

Cheers,

Todd

got one here in D'port at the Rotech workshop, engine/loom/turbo ready to go, no ecu with this one but i think i know of someone who may part with his. also have a spare turbo and a box but its an auto :D pm me ure number and i will give u a buzz) cheers Damo

tell me more... k's, condition, price...

Its Ray's old motor with my running gear cobber.

RB20 with 75ks

TD-06 20g L2 10cm

GReddy manifold

GReddy 38mm gate with party whistle attached :dry:

Greddy dump

Greddy hot pipe

JJR oil cooler

HYBRID GT FMIC

APEXI Power intake

modified cams gears (stock gears that are now adjustable)

Gates racing heavy duty timing belt

all new belts (P/S, air con,

NGK race plugs (not installed yet)

strong RB20 gearbox with C's short shift kit

Brand new EXEDY heavy duty clutch (under 500ks old)

OMORI oil pressure & temp, water temp and exhaust gauges

GReddy boost gauge

Currently has Central 20 ECU with Dr Drift remap but have PFC

im sure there is other stuff but i cant think of it off the top of my head :ermm:

$3800

Its Ray's old motor with my running gear cobber.

RB20 with 75ks

TD-06 20g L2 10cm

GReddy manifold

GReddy 38mm gate with party whistle attached :)

Greddy dump

Greddy hot pipe

JJR oil cooler

HYBRID GT FMIC

APEXI Power intake

modified cams gears (stock gears that are now adjustable)

Gates racing heavy duty timing belt

all new belts (P/S, air con,

NGK race plugs (not installed yet)

strong RB20 gearbox with C's short shift kit

Brand new EXEDY heavy duty clutch (under 500ks old)

OMORI oil pressure & temp, water temp and exhaust gauges

GReddy boost gauge

Currently has Central 20 ECU with Dr Drift remap but have PFC

im sure there is other stuff but i cant think of it off the top of my head :w00t:

$3800

Hmmm, a lot more than I was looking at... (just over 2k more than what I have lined up) might be able to squeeze to something like this...

RB20 with 75ks

TD-06 20g L2 10cm

GReddy manifold

GReddy 38mm gate with party whistle attached :)

Greddy dump

Greddy hot pipe

strong RB20 gearbox with C's short shift kit

Brand new EXEDY heavy duty clutch (under 500ks old)

- $2200

Hmmm, a lot more than I was looking at... (just over 2k more than what I have lined up) might be able to squeeze to something like this...

RB20 with 75ks

TD-06 20g L2 10cm

GReddy manifold

GReddy 38mm gate with party whistle attached :)

Greddy dump

Greddy hot pipe

strong RB20 gearbox with C's short shift kit

Brand new EXEDY heavy duty clutch (under 500ks old)

- $2200

Sorry cobber i couldn't go that low as i can get that for the turbo :)

It will go as a whole package or not at all but im sure you could get Toff's set up for less :w00t:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...