Jump to content
SAU Community

Recommended Posts

hi,I have just got myself a r32gts4 man.std but for 3inch ex,hks bov,k&n panel filter.want to upgrade,but have some questions,where to start?,i have Haltec interceptor,will this do the job? im guessing i/c,dump,ecu,injectors would be some of the first things to look at,so was hopeing for advice on where to start..stdRB20 5spd.cheers.$2000 to spend for now..

Edited by Jamie72
Link to comment
https://www.sau.com.au/forums/topic/192146-mods-for-r32gts4/
Share on other sites

Get yourself a front mount kit from just jap they seem to work fine, a good dump pipe if you dont allready have one, chuck the rubbish k&n filter in the bin keep the airbox just put in a BMC or APEXI panel filter a good boost controller preferably Electronic and closed loop (AVCR or HKS EVC) sell the interceptor and get full management of some form (cough power fc cough) the ecu is the key to so many doors, if i had my time again i would buy that first before anything else if your a newbie spend some time and research before you buy you will also learn heaps along the way.:) hope im a help of some form

Get yourself a front mount kit from just jap they seem to work fine, a good dump pipe if you dont allready have one, chuck the rubbish k&n filter in the bin keep the airbox just put in a BMC or APEXI panel filter a good boost controller preferably Electronic and closed loop (AVCR or HKS EVC) sell the interceptor and get full management of some form (cough power fc cough) the ecu is the key to so many doors, if i had my time again i would buy that first before anything else if your a newbie spend some time and research before you buy you will also learn heaps along the way. >_< hope im a help of some form

thanks ,that should point me in the right direction,got a blitz dual sbc,should be ok?

You can end up spending alot more than you would buying a real GTR as something worth keeping in mind.

If you want something fairly mild then;

* Exhaust is a good place to start (turbo back).

* Aftermarket ecu, sort timing and fuel out prefferably or S-AFC.

* Clutch and Flywheel upgrade will be needed once power is up , a lightweight flywheel while your at it.

* You will need fuel pump and injectors once you step into an upgraded turbo

Lots of things you can do really but, depends on what you would like the car to be.

If you want lots of power in the long term, just save for a built RB26 it more or less drops straight in with very few bits to get. The GTS4 gearbox is the same strength wise too, it's not the poxy RB20 box out of gtst's.

For the record the K&N panel filters are fine and re-usable, sorry 13thracer I've used exactly the same panel filter on a high powered GTR (among other cars) with more power than the lowly RB20 is ever going to produce. People only have issues with them when they don't read instructions and over oil them.

Have a good read of some of the links here:

http://www.skylinesaustralia.com/forums/t66556.html

Specifically this one:

http://www.skylinesaustralia.com/forums/t45218.html

Goes over the basic items for you.

Cheers

You can end up spending alot more than you would buying a real GTR as something worth keeping in mind.

If you want something fairly mild then;

* Exhaust is a good place to start (turbo back).

* Aftermarket ecu, sort timing and fuel out prefferably or S-AFC.

* Clutch and Flywheel upgrade will be needed once power is up , a lightweight flywheel while your at it.

* You will need fuel pump and injectors once you step into an upgraded turbo

Lots of things you can do really but, depends on what you would like the car to be.

If you want lots of power in the long term, just save for a built RB26 it more or less drops straight in with very few bits to get. The GTS4 gearbox is the same strength wise too, it's not the poxy RB20 box out of gtst's.

For the record the K&N panel filters are fine and re-usable, sorry 13thracer I've used exactly the same panel filter on a high powered GTR (among other cars) with more power than the lowly RB20 is ever going to produce. People only have issues with them when they don't read instructions and over oil them.

thanks for the great info.happy about the gearbox,definate bonus.and that i didnt waste my 90 bucks on the k&n :rofl: i`m thinking the power fc seems like the way to go.exhaust is 3inch from turbo back,has hks voltage stabiliser,...ps.will the apexi pfc work with my blitz dual solinoid b/c ?

as you may or may not know the gts4 is a bit heavy..i think as heavy as a gtr but it has the power of a gtst. Therefore making it a bit lighter would help to

here is a thread about making a r32 gts4 lighter i started a while ago

R32 GTS4 Lighter

hope it helps :P

weight reduction is good :D:):D:) dont quote me but from memory the oldschool drag racers used to say loosing 400 pounds is equal to adding 100 HP and the best thing about weight reduction less impact on your driveline and most of it is free.

Edited by 13thracer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...