Jump to content
SAU Community

Recommended Posts

I'm in for that, depending where you's going.. I'll bring the guys that come to my cruises too.. The more the merrier..

Unfortunately it's not a free-for-all as it is an official club event and as such is for members only. Like for example last years one was a navigation/orienteering event which involved material distributed by the executive (and helpers :D). Only financial members were able to enter/ had information as to where it starts etc..

also remember guys, members also get membership cards that entitle said members to discounts with reputable workshops/suppliers as well as a sponsors area within the members area of the forums that has extra special deals :).

sorry to spam this thread, and I'll do my best to come along to one of your cruises Assasin, maybe even this one. See you at the Pizza Cruise :P

Unfortunately it's not a free-for-all as it is an official club event and as such is for members only. Like for example last years one was a navigation/orienteering event which involved material distributed by the executive (and helpers :dry:). Only financial members were able to enter/ had information as to where it starts etc..

also remember guys, members also get membership cards that entitle said members to discounts with reputable workshops/suppliers as well as a sponsors area within the members area of the forums that has extra special deals :(.

sorry to spam this thread, and I'll do my best to come along to one of your cruises Assasin, maybe even this one. See you at the Pizza Cruise :rolleyes:

Well put. To join click the link in my sig

Well put. To join click the link in my sig

AAAANNNYYYYWAAAYYYSSSSS, this thread has been well spammed!

Just for the record everyone reading this, I'm only here to get drivers together and on the streets together. I have no interest in joining. My motive is to get people acquainted, people helping others with there skylines who have problems, and everyone just really having fun whilst out there, not to mention new friends being made along the way..

So back to the point of this thread everyone, I have now 10 cars confirmed going. Please let me know who else is interested. Sorry for the above spams to those guys who are car enthusiasts.

To everyone else who comes to the cruises, looking forward to seeing you's for the wisemans drive on the 11th Nov.

not sure if u guys have realised but autosalon final battle is on 1st and 2nd of december at olympic park. dunno if it matters...but it might make meeting at the carpark a bit difficult. could get pretty packed.



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...