Jump to content
SAU Community

Recommended Posts

Item

GARRET 3071R Dual Ball Bearing Turbo KIT rated to 475hp

- Exhaust A/R 0.71,

- Compressor cover A/R 0.5, with Internal Wastegate. Adjustable actuator.

- Also have a custom intake pipe, (reduce 4 inch intake to 3 inch for AFM), cooler elbow and a heap of silicon joiners, bits n pieces

- DOES NOT come with lines - only what is mentioned above

- Should be good for around the 270rwkw mark on an RB25 with supporting mods (please read thread by "skylinecoupple" for talk on this turbo)

3071R Turbo Thread by "skylinecouple"

Condition:

Excellent, absolutely no shaft play, only been used for under 1000kms at only 14psi then removed

Price:

$1400 FREE POST in Aus IS NEGOTIABLE reciepts for $1900 from Garret

To Fit: (What car)

Whatever you like! Was used on a RB25, bolts to standard dump position if you want a low mount setup, has the 5 bolt Nissan dump pattern, should fit all RB's and SR's excluding RB26. All is needed is lines and possibly a spacer/adaptor plate to mount onto manifold. Silicon bits and intake piping inlcuded as said above.

Location:

Sydney

Contact:

Post, or email [email protected]

Comments:

Pics will be up later today, Track this topic!

Call DIAMOND AUTOMOTIVE for installation in Sydney (1300 303 956)

R33 SERIES II Headlights complete Pair SOLD

Power FC RB25DET SOLD

Z32 AFM SOLD

SARD 550CC Injectors x 6 SOLD

post-30339-1194418927_thumb.jpg

post-30339-1194418969_thumb.jpg

post-30339-1194419031_thumb.jpg

post-30339-1194419270_thumb.jpg

post-30339-1194419306_thumb.jpg

post-30339-1194498344_thumb.jpg

post-30339-1194619020_thumb.jpg

post-30339-1194656989_thumb.jpg

post-30339-1194656997_thumb.jpg

post-30339-1194657012_thumb.jpg

post-30339-1194657020_thumb.jpg

post-30339-1194657026_thumb.jpg

post-30339-1194657047_thumb.jpg

post-30339-1194657056_thumb.jpg

post-30339-1194697125_thumb.jpg

post-30339-1194697132_thumb.jpg

post-30339-1194697138_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/192642-garret-3071r-kit-as-new-price-drop/
Share on other sites

Item:

Apexi Power FC for R33 GTS-T RB25DET (Discontinued)

Age:

Brand new in the box/plastic

Condition:

Excellent, never been used

Price:

$1500 FREE POST in Aus negotiable paid $1550 + post

To Fit: (What car)

R33 GTS-T RB25DET

Location:

Sydney

Contact:

Post, or email [email protected]

Comments:

Yes, these are the ones they dont make anymore, selling due to change of direction

Item:

Genuine Bosch Z32 AFM

Age:

Brand new in the box as sent from Slide

Condition:

Excellent, never been used

Price:

$250 FREE POST in Aus paid over $300

Location:

Sydney

Contact:

Post, or email [email protected]

Comments:

Selling due to change of direction

May organise bundle price.

Also selling Garret 3071R 500hp turbo and SARD 550cc injectors, will add more info soon. Enquire for more info.

C'mon Nick. What a rip!!! :thumbsup:

LOL yeh but i NEED this :). my car has has injectors, bigger turbo and a few other upgrades but cant do anything till i get a pfc as the deal with the last one i was gettin fell through LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...