Jump to content
SAU Community

Sorta Newbie Question (I hate these)

Guest P1aGu3

By Guest P1aGu3,
in Queensland

 Share

Recommended Posts

Guest P1aGu3

Guest P1aGu3

Posted
Posted

Hi Guys, Michael here up in Cairns, 28yo. I currently own a busted arse commodore which is off the road, soon to be taken to the wreckers as soon as my Skyline arrives (I am taking up to 2 months to find the right car at Auction)

I have some questions about the various models on offer, and I am really confused since I cannot find info on the net.

I know the difference between GTR and GTS etc so I am not that lame, however ...

R33 GTS-T

R33 GTS-T Type-M

R33 GTS-T Type-M Spec-2

R33 GTS-25T

R33 GTS-25T Type-M

What the hell are the difference between all of those, I am assuming the Type-M means Manual, and the 25T means 2.5l engine (which all the R33's seem to have)

Any help is accepted gracefully.

The R32 GTR is at the top of my list of "Car's I want" followed by the best quality, lowest km R33 from above.

Link to comment
https://www.sau.com.au/forums/topic/1928-sorta-newbie-question-i-hate-these/
Share on other sites
  • 1 year later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...