Jump to content
SAU Community

Recommended Posts

Hey guys...

Hoping u can shead some light on this for me..

While getting up to speed to get on the freeway this morning, was in 2nd or 3rd gear , on boost and sitting at 5,000rpm.. the car all of a sudden starts spluttering and felt like a miss fire like a limiter had kicked in...

Havent changed anything anything on the car yet and is completly stock..

Im guessing its going to be spark plugs but i thought id post it up anyway!!

thanks in advance for ya help

mick

Link to comment
https://www.sau.com.au/forums/topic/194902-r34-gtt-with-a-problem/
Share on other sites

Hey guys...

Hoping u can shead some light on this for me..

While getting up to speed to get on the freeway this morning, was in 2nd or 3rd gear , on boost and sitting at 5,000rpm.. the car all of a sudden starts spluttering and felt like a miss fire like a limiter had kicked in...

Havent changed anything anything on the car yet and is completly stock..

Im guessing its going to be spark plugs but i thought id post it up anyway!!

thanks in advance for ya help

mick

Just a thought, wasn't the TCS control kicking in when u put ur foot down was it?

not that i remember...have had cases when i have come through corners and the skid light has come on...

going to jack the car up this weekend and spin one wheel and see if i have a LSD or mechanical LSD in it... still know f**k all bout the car atm!

not that i remember...have had cases when i have come through corners and the skid light has come on...

going to jack the car up this weekend and spin one wheel and see if i have a LSD or mechanical LSD in it... still know f**k all bout the car atm!

When that skid light comes on, the TCS has kicked in. Just in case u didnt know there is a TCS button on the left of steering just above ur knee. Hit that button, a light on the dash will pop up saying TCS OFF. Then put ur foot down n have fun, Oh be careful in the wet, boost on = sideways...

haha... found that button the first day i had the car... thought it would be a flick switch...didnt notice till a few minutes later that there was a light on the dash for it.. haha

so if i turn the tcs button off and try it agian it shouldnt hesertate at 5,000rpm??

haha... found that button the first day i had the car... thought it would be a flick switch...didnt notice till a few minutes later that there was a light on the dash for it.. haha

so if i turn the tcs button off and try it agian it shouldnt hesertate at 5,000rpm??

Try it, put ur foot down n find out, then hit the button again to turn it off(TCS ON) n try again. If thats not the issue, refer to all other threads.

If it hesitates its not tcs because tcs engages when you lose traction, I dont know many people pulling 5g around a corner tight enough to turn it on. unless its raining. i.e 5g is a lil high for rounding a corner.

I think your sparks are on the way out mate, get someone to look at them.. skylines have a problem at 5g with flatspots so could be that..

Do you have a front mount? pull out ur plugs and see if they are fouled..

If you cant be bother get on the highway and launch it to try burn off anything on the plugs.. you will prob have to change them soon. when you do regap them to 0.8 - 1.0 somewhere about there.. unless you up the boost then keep it at 0.8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...