Jump to content
SAU Community

Where To Buy Thermo Fan In Bris

stenve

By stenve,
in Queensland

 Share

Recommended Posts

Oblivion Grand Master

Oblivion

Posted
Posted

eh?

why would you go else where....

autobarn sell davis craig...and repco sell recpo which is just the davis craig repackaged.

both are fine you just need to get a controller and sensor...i would recommend pivot.

33driver Rising Star

33driver

Posted
Posted

you want cheap - go to any good auto elec and ask for 'oex' brand, good and cheap, davies craig is mid range and spal are top end.

where you located? OEX make EXCELLENT thermo switches which are cheap too, you after electronic switching or mechanical?

33driver Rising Star

33driver

Posted
Posted
im using ICE thermos hehe... works well and use std R32 sensor/switch on rad

u guys do it all the hard way..

K.I.S.S

ICE thermos are made by OEX :wave: there the ones I was talking about hehe good value for money

stenve Proficient

stenve

Posted
  • Author
Posted

thanks for the replies guys.

repco wanted to charge me $240 for a 16" straight blade.

supercheap had calibre 16" straight blade for $100

im on the southside so where is a good place to get these oex or ice thermos from? im looking to switch it electronically.

basically my clutch fan is stuffed and im looking at $140 upwards to replace it so was hoping to fit a 16" thermo in the stock shroud for around that price. less if i can.

ive searched and apparently the s shape blades are better which is why i stayed away from the straight ones i dont want to have issues with heat.

thanks alot

33driver Rising Star

33driver

Posted
Posted
thanks for the replies guys.

repco wanted to charge me $240 for a 16" straight blade.

supercheap had calibre 16" straight blade for $100

im on the southside so where is a good place to get these oex or ice thermos from? im looking to switch it electronically.

basically my clutch fan is stuffed and im looking at $140 upwards to replace it so was hoping to fit a 16" thermo in the stock shroud for around that price. less if i can.

ive searched and apparently the s shape blades are better which is why i stayed away from the straight ones i dont want to have issues with heat.

thanks alot

repco sell the ICE ones but put a horrible markup on it, kinda complicated to explain the ICE/Repco relationship though. PM me with your suburb and i'll tell you where to go :D

markimak Grand Master

markimak

Posted
Posted
ICE thermos are made by OEX :) there the ones I was talking about hehe good value for money

yep.. :)

thanks for the replies guys.

repco wanted to charge me $240 for a 16" straight blade.

supercheap had calibre 16" straight blade for $100

im on the southside so where is a good place to get these oex or ice thermos from? im looking to switch it electronically.

basically my clutch fan is stuffed and im looking at $140 upwards to replace it so was hoping to fit a 16" thermo in the stock shroud for around that price. less if i can.

ive searched and apparently the s shape blades are better which is why i stayed away from the straight ones i dont want to have issues with heat.

thanks alot

hmm $140. ill supply and fit a GTST hub fan for $60 interested.. :3some:

thermos are for E-W mounted engines.. and RB silvias :D

stenve Proficient

stenve

Posted
  • Author
Posted

definatly could be interested. i just want to get rid of the f**king annoying whirring noise that im pretty sure the clutch fan is making.

i thought it might of been beneficial to go a thermo fan because it lessens the drag on the engine (yeah i know it probably makes bugger all difference.)

been reading mixed reports about going to thermos though.

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

I just installed a Twin thermo setup in a shroud. A bit of trimming and it's a perfect fit on a stock R33 radiator. A bit more trimming for a close fit Ally 50mm radiator. Came from a late falcoon for $200 from Autobarn (or less on trade). Used an in hose fitting for the 90deg on/80deg off thermal switch.

I just have to get the current draw right. It's pulling more than 30 Amps so fitting a new relay and stepping up to a higher fuse rating tomorrow.

dangerbones Explorer

dangerbones

Posted
Posted
I just installed a Twin thermo setup in a shroud. A bit of trimming and it's a perfect fit on a stock R33 radiator. A bit more trimming for a close fit Ally 50mm radiator. Came from a late falcoon for $200 from Autobarn (or less on trade). Used an in hose fitting for the 90deg on/80deg off thermal switch.

I just have to get the current draw right. It's pulling more than 30 Amps so fitting a new relay and stepping up to a higher fuse rating tomorrow.

I am looking at setting up twin thermo's from an AU in my R33 too, how have they gone in yours so far? have you got any pics of your handy work? was the thermal switch expensive?

boot_it Enthusiast

boot_it

Posted
Posted
im using ICE thermos hehe... works well and use std R32 sensor/switch on rad

u guys do it all the hard way..

K.I.S.S

the over temp switch in the r32 rad come on tooo late (90.c) but if u buy a temp switch of a mitubishi lancer/marage /magna (tridon part no TFS141 for around $30 which is a bolt in replacement and it comes on around 83.c

i use these all the time when i do rb conversions into silvias with 1x14in and 1x12in thermo fans on a r32 rad and never had any over heatin issues

stenve Proficient

stenve

Posted
  • Author
Posted
well pm me mate.

may do cheaper.. lol

not much diff in going thermo. ull find it will prob over heat. and ull find that ur batt alternator has more load now. so ur car will load up more to charge. yay

cool thanks man, probably send a pm your way in the next couple of days.

as long as that annoying sound is gone at the end of it i'll be a happy camper

cheers

markimak Grand Master

markimak

Posted
Posted
the over temp switch in the r32 rad come on tooo late (90.c) but if u buy a temp switch of a mitubishi lancer/marage /magna (tridon part no TFS141 for around $30 which is a bolt in replacement and it comes on around 83.c

i use these all the time when i do rb conversions into silvias with 1x14in and 1x12in thermo fans on a r32 rad and never had any over heatin issues

ohh cheers for that mate. ill keep that in mind. havent had an issue with the RB sil yet. its actually been more reliable than my older cars. ill look into switchin it next time i do one.

yeah, clutch fans are way more efficient at cooling the engine... get marki to check it out he's awsome at wat he does

thanks brenton.

hey u wanna come watch at the strip on wednesday night ill send ya a SMS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...