Jump to content
SAU Community

Recommended Posts

Hi guys I'm pretty sure this plug is for the factory mobile setup, but does anyone recognise what phone it would plug into? would it be worth changing the plug to match my Nokia phone plug? How easy would it be to change it?

cheers

post-927-1195893234_thumb.jpg

post-927-1195893277_thumb.jpg

post-927-1195893338_thumb.jpg

Edited by vspec2
Link to comment
https://www.sau.com.au/forums/topic/195049-v35-factory-mobile-phone-setup/
Share on other sites

that said if its like every other dealer fit option I've seen onthese It can be modded to take another nokia - benz did a similar thing.

Chris

You're like an encyclopedia, thanks mate!!!

I'll give you call about the DVD headunit sometime this week.

cheers

Alain

That's cool! I've read about it, but haven't seen that before. Does the other side of the steering wheel have controls for the stereo?

What model is your car?

Might want to check to see if it can connect by bluetooth because I have read that it was an option.

Hi no controls on the other side. the top and bottom buttons control the stereo volume and change tracks and radio stations.

2005 6MT

No Bluetooth I'm afraid tested that a while back.

cheers

That's cool! I've read about it, but haven't seen that before. Does the other side of the steering wheel have controls for the stereo?

What model is your car?

Might want to check to see if it can connect by bluetooth because I have read that it was an option.

would LOVE to play with this. (especially since it was a dealer fitted option..) anyone in brissy got this?

Hi Chris , got 1 off the wharf today 05 6sp , ready to comply , will have to ring you and talk . on the southside of brissy as well .

Regards Brad

brad,

thanks for today.

for the record that unit is BUILT INTO the car similar to what lexus did in the 90s with motorola. my thoughts would be to find the phone that runs it and use that. nothing else can be used. this info is based on the above car.

Hi guys I'm pretty sure this plug is for the factory mobile setup, but does anyone recognise what phone it would plug into? would it be worth changing the plug to match my Nokia phone plug? How easy would it be to change it?

cheers

Hi, I just picked up my 6mt 06 last week after a lot of red tape, it too has the same phone connection.

Is there a way to get the bluetooth to work?

Hi

The buttons are for the phone only so they dont control any audio controls. When you press the phone button it displays the phone menu on the sat/nav screen prob shows phone info etc.. If I can find a phone that actual works with it I will give an update.

cheers

hey guys,

i have the same phone connector in my car.. I went through the manual and it says that it is only compatible with au phones. For those who don't know au is a CMDA-1 phone network run by KDDI in Japan. There are quite a few phones designed for au by different manufacturers so I am assuming that all of these phones must have the same connector? Check the lineup here.

There's a Sanyo phone there under global passport which is gsm and cdma so that should work.. But I really would prefer a phone adapter :)

Just did a bit more digging... you basically need the reverse of this cable.. I actually have an adapter that does the same thing.. just need to reverse the flat connector

nissyann_ga2-img600x450-1195474004dscn0052.jpg

Edited by karim
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...