Jump to content
SAU Community

Recommended Posts

forsale wrecked 1984 MR30 TI with a custom built L24ET in it. Car was one of a kind and mint until i hit a tree init im chasing $1700 but im open to offers any more questions dont hesitate to ask

im in adelaide south aus

http://pixpipeline.com/d/9b2391ab1e47.jpg

Hey Mate, Just wondering what you would want for the Engine setup from the car. Also could you describe how it has been setup ect.

Aswell as how many km's ect.

Cheers

Hey Mate, Just wondering what you would want for the Engine setup from the car. Also could you describe how it has been setup ect.

Aswell as how many km's ect.

Cheers

170,000km on the clock serviced every 5000km's its auto, got the manifolds off a l20et, a small front mount, a bov, and a rb25det turbo made 98.8kw and 290nm of torque with 2 in jectors that started leaking halfway throu the dyno run so that has been fixed and was running 10psiwhen i crashed it, so it hadnt been back on the dyno since then so i guess it would have made 115kw then, it also comes with a nismo works cam (not installed) so with that, 12psi, and a manual box 140kw would be fairly achievable also i found that there are little tin restrictors in the exhaust ports which were used for emmissions so if you pulled them out that would make a huge difference.

im only really wanting to sell it complete im bacicly chasing $1500 for the motor and $200 for the car the turbo gear cost me $2000 and took me 2 years to find the stuff but at this stage i will take offers

  • 2 months later...

hey mate i own a mr30 thats missing front passenger window do ya think ya got one also wondering if you still got the tailights want to change my standard mr30 ones for the dr30 look i think hotplates is what makes a skyline a skyline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
    • Thanks for the details mate , for me I think being a daily driven and happy with a basic tune (630Nm and 310kw) . Seems to be working well I just put on a set of Michelin Pilot Sport 4 should help put the power down. I'm going to start looking a brakes and LSD in the future so I might reach out to you on options to upgrade the brakes. Cheers - Dee   
    • I have a HR34 GT... RB20DE My speedo doesn't work! The rest of the gauges seem to work, fuel and RPM. I did not notice if my odometer was going up when driving last.  Any ideas? Speed sensor? Hopefully atleast... Gauge cluster perhaps? Or is that unlikely because the other gauges are working?   Any insight is appreciated. This is a rather new to me car. Lol 
×
×
  • Create New...