GMan Posted November 27, 2007 Share Posted November 27, 2007 Hi everyone, A very weird problem had just occured. i drive a r34 gt-t in automatic/tiptronic. i was driving down a slope when i started to notice that my car started spluttering. it was raining and i thought that some water had gotten into my intake so i just hit the accelerator harder. when i did that it spluttered more and started to stall. i pulled over and put it into neutral and just started to rev it out. put it back into drive and it just stalled. i tested out every gear and put it into reverse and it was fine. put it back into drive and it stalled again. gave it some revs in neutral and chucked it into drive and then stalled again. all this resulted in me waiting 1.5 hours for a tow truck and then got charged $80 for a 5min ride its at hills motorsports now and they are going to look at it tomorrow. hopefully it wont be too expensive. this is my 2nd incident regarding the rain....first was a misfiring/cant start issue. any insight or information would be greatly appreciated! cheers! Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/ Share on other sites More sharing options...
The Mafia Posted November 27, 2007 Share Posted November 27, 2007 do you have an aftermarket vent to atmosphere BOV? Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3501205 Share on other sites More sharing options...
GeeTR Posted November 27, 2007 Share Posted November 27, 2007 (edited) One would think its electrical, if it only occurs in the rain. Have you changed anything recently? Do you have a vented bonnet? CAI? Try checking error codes. Edited November 27, 2007 by GeeTR Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3501367 Share on other sites More sharing options...
TTT Posted November 27, 2007 Share Posted November 27, 2007 if it's rain related, it must be water getting in to something. Vented Bonnet = spark plug swimming pool fully sick pod filter in front bar = wet muff .. sorry.. I mean wet MAF. Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3501459 Share on other sites More sharing options...
dave_1 Posted November 28, 2007 Share Posted November 28, 2007 being auto, and you said it works ok in nuetral and reverse, my guess would be the isolator/safety switch that wont let you start the car in gear? Im no expert, but its just an idea. maybe its got a loose connection or exposed wire somewhere Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3502915 Share on other sites More sharing options...
GMan Posted November 28, 2007 Author Share Posted November 28, 2007 do you have an aftermarket vent to atmosphere BOV? nope...bov in standard position One would think its electrical, if it only occurs in the rain. Have you changed anything recently? Do you have a vented bonnet? CAI? Try checking error codes. no vented bonnet. the mechanics seem to think thats its electrical but still not sure yet. no cai. if it's rain related, it must be water getting in to something.Vented Bonnet = spark plug swimming pool fully sick pod filter in front bar = wet muff .. sorry.. I mean wet MAF. im not so sure if its just a coincidence with the rain that my car always seems to break down on. but yea last time i had the spark plug swimming pool incident regarding it so no vented bonnet. also my pod is at the standard position where my airbox use to be. being auto, and you said it works ok in nuetral and reverse, my guess would be the isolator/safety switch that wont let you start the car in gear?Im no expert, but its just an idea. maybe its got a loose connection or exposed wire somewhere no idea.. its not that it wont start in gear..u cant start autos in gear.. it just keeps stalling in gear thats all except for reverse which is weird. thanks everyone Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3503649 Share on other sites More sharing options...
GMan Posted November 30, 2007 Author Share Posted November 30, 2007 i just heard back from the mechanics. he plugged the scanner on and it didnt show up with an error code. he says that its either mechanical or theres a problem with the ecu. just wondering if anyone else has had this problem before?? Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3506108 Share on other sites More sharing options...
GMan Posted December 4, 2007 Author Share Posted December 4, 2007 finally got a word back today after a whole week of it sitting in storage. he had told me that the computer was not giving out any power. power was going in but not coming out so he sent it away to get it tested. does this sound right to anyone? if the computer didnt work then the car wouldnt start right? Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3513777 Share on other sites More sharing options...
TTT Posted December 4, 2007 Share Posted December 4, 2007 don't get it repaired. buy another stock auto ecu from wreckers or these forums. cost a fraction of repair.. but you're right. the ecu controlls everything including the auto box. so if it was faulty, it wouldn't run at all. I don't know muuch about auto's, but there must be something that controls idle when in gear. just like when the air con is on etc.. Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3514146 Share on other sites More sharing options...
GMan Posted December 12, 2007 Author Share Posted December 12, 2007 yea just got word back from mechanics couple days ago. the 1,2 shift valve solenoid has failed. this means that when drive is selected, 1st and 2nd gear both comes on at the same time. now im just patiently waiting for the part to come in. im a little annoyed as he promised to have my car ready 2 days ago but he had ordered the wrong part for my car. Link to comment https://www.sau.com.au/forums/topic/195460-stalling-issues-in-drive-please-help/#findComment-3528384 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now