Jump to content
SAU Community

Recommended Posts

Hey,

I made a couple posts in the "car not accellerating propperly" thread, but still having problems with my car. It's a 1990 R32 gts-t

Here are my current modifications:

pod filter

3" cat-back exhaust

FMIC

Here is my problem:

When the car is hot, if i accellerate hard, the engine pops and misfires at about 3500rpm. Only happens under load and only when i've been driving for about 5 mins or so and it's nice n warm.

Here's what i've done so far to try and fix it:

Upgraded fuel pump to one from an R33 GTR

New spark plugs

Replaced coils with 2nd hand ones from another 32 gts-t

Not sure what's going wrong.. seems like it's a fuel or ignition problem, but i can't quite tie it down. I put in a fuel mixture display kit from Jaycar to see if it was rich or lean when it spits n pops, but the lights just flash from lean to rich and back over n over again.

I'm pretty much out of ideas. Maybe i need to upgrade coils. Maybe i should try regapping the spark plugs.. i really don't know anymore.

Any advice or suggestions would be greatly appreciated. May end up that i'll just have to take it to a garage with a dyno to get it diagnosed. better start saving my $$

Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/
Share on other sites

put in an autotechnica fuel pressure regulator.. i don't recommend them.. crappy cheap parts, broke in a couple places, but managed to get it working in the end.

fuel pressure was only 35psi when idling.. upped it to 60psi at idle and seems to have fixed the problem.. more testing (aka fanging it) needed, but signs look good.

Thanks Gaz n Pal for the suggestions.

Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3509249
Share on other sites

try a new air flow meter.....

my afm was dicky when the car got hot and i did all the usual 'obivous' quick fixes such as

-changed my igniter module

-changed all 6 coilpacks

-put in new plugs and gapped them to .6mm

-changed air filter and changed fuel filter

problem ended up being the air flow meter was faulty.... give ben at KYP a call

Edited by Pandaah32
Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3515414
Share on other sites

hahaha.. maybe you can donate me the cash mr engineer sir.

but yeah.. me n Steve found tonight that my coils are arcing onto the block seems the "new" coils were about the same condition as the old ones. gonna araldite them and reduce the plug gap.. should do the trick.

Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3518287
Share on other sites

I've got a set of standard 32gtst coils doing nothing other than taking up space.. they were working well enough to make 245rwhp on the RB20 :nyaanyaa:

Or a set of splitfired aren't too pricey, I got mine for $515 delivered I think it was.

Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3518768
Share on other sites

ok this is really annoying me now.. problem is still happening with araldited coils and spaller plug gaps.. gonna try air flow meter next.. Were you getting the same symptoms when your airflow meter was faulty Pandaah?

next to try after that will be ignition module.. how do i go about testing that?

Edited by Wogan
Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3520809
Share on other sites

another thing i find interesting is that my car is making about 12psi of boost without a boost controller installed.. inspected the wastegate actuator and the hose feeding it, but they seemed fine. The previous owner hadn't done much work to the car and didn't have a working boost gauge.

could it be that i'm getting too much boost and the standard ECU is cutting the fuel?

Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3520822
Share on other sites

ok this is really annoying me now.. problem is still happening with araldited coils and spaller plug gaps.. gonna try air flow meter next.. Were you getting the same symptoms when your airflow meter was faulty Pandaah?

next to try after that will be ignition module.. how do i go about testing that?

borrow one from someone else or throw it on a dyno for a full diagnostic run

if your running stock ecu they can check what the prob is if they have the software

Link to comment
https://www.sau.com.au/forums/topic/195931-car-problems/#findComment-3520849
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...