Jump to content
SAU Community

Recommended Posts

changed spark plugs last week to NGK BKR6EIX plugs on my r32 gts-4

a few days later..after driving for an hour that day..car loses power and sounds very lumpy..and very weak....the problem came on and off kinda that day cos i made a few stops with hour or so in between drives...but on the way home it happened again until i got home. next morning, car runs fine. problem came back again y'day after driving for an hour as well, but i did a lot of driving y'day with not that long breaks in between so problem stuck all day. this morning, car was fine again, havnt driven it.

also, since last week, my idle wen car is cold kinda moves up and down from 800-1000 for around 30 seconds, onli then it becomes stable at 1000..

soo..any ideas? is it the spark plugs? coil pack? i realli have no idea and need to have a look at it tomororw..as i'm too broke to take it to mechanic rite now. any help will be apprecieted and apologies for such a long story.! cheers

Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/
Share on other sites

hrm the old sparkies look pez..not sure if i actualli wanna put them back in..

anything else?

if u wonna eliminate the coilpacks as the cause you can unplug one at a time and see if the idle changes (which it should) if the idle doesnt change then that coil is shagged....(i think thats how it works)

while the coilpack cover is off you might as well try ur old plugs, if that fixes the problem then take ur plugs back and get them changed.

AiF

P.S. my car was running sh!t due to faulty coilpacks due to a pool of water in between the rocket covers.

Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/#findComment-3522458
Share on other sites

changed spark plugs last week to NGK BKR6EIX plugs on my r32 gts-4

a few days later..after driving for an hour that day..car loses power and sounds very lumpy..and very weak....the problem came on and off kinda that day cos i made a few stops with hour or so in between drives...but on the way home it happened again until i got home. next morning, car runs fine. problem came back again y'day after driving for an hour as well, but i did a lot of driving y'day with not that long breaks in between so problem stuck all day. this morning, car was fine again, havnt driven it.

also, since last week, my idle wen car is cold kinda moves up and down from 800-1000 for around 30 seconds, onli then it becomes stable at 1000..

soo..any ideas? is it the spark plugs? coil pack? i realli have no idea and need to have a look at it tomororw..as i'm too broke to take it to mechanic rite now. any help will be apprecieted and apologies for such a long story.! cheers

hey mate check all connections on ignition module that sits on back of rocker cover as when i changed my plugs the plug wasnt locked in and a few days later it was doing the same as your car,pushed the plug and all was back to normal :D

Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/#findComment-3522464
Share on other sites

i had a similar problem while i was looking for the right spark plugs for my RB20, as the RB engines are picky/fussy with plugs.

i've tried a few different NGK plugs, and have found BKR7E to be the best. they have a 0.8mm gap and won't blow out the spark under boost.

hope that helps. :(

Edited by dmr
Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/#findComment-3524962
Share on other sites

  • 4 months later...

If i were you i would buy a set of the plugs the same as the ones u pulled out, and try them. Then atleast u know they should be fine since their were obviously no problems prior to u replacing the plugs, their is also a way to check the coilpacks by measuring the resistance between pin 1 and pin 2 on the coilpack, using a multimeter... if it is between 0.6-0.9 then it is ok othawise the chances are ur coilpack(s) is buggered. Although apparantly sometimes they can test up ok but if they have even a hairline that can cause a misfire so yeh... i really think that if it were plugs or a coilpack it would be happening all the time, especially under boost. hope that helps man.

Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/#findComment-3791469
Share on other sites

i was thinking of putting the same ones back in, but i did change them cause i was getting the usual miss fire above 5k.

the problem happens when the car is warmed up and running for about 30mins of driving. if its cooled down or the next day it will run fine untill it warms up again and again happens

Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/#findComment-3791626
Share on other sites

  • 3 weeks later...

I was having this problem yesterday. Coil packs 5&6 went open circuit on me for no apparent reason.

Drove to work, left the car for 8hours then jumped back in and on starting it it sounded funny.

Went home and with a Mulit meter checked all the coil packs resistence , 1,2,3 were 0.6 to 0.9 but 4 was 1.4 and 5 and 6 were nothing.

Splitfires on the way.

Link to comment
https://www.sau.com.au/forums/topic/196048-need-r32-help/#findComment-3838553
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...