Jump to content
SAU Community

Recommended Posts

dam you all i get 350km around town in tassie, no matter how i drive, and not much better on the high way.

That suggests that the parts of your fuel map you use during light cruise are too rich. Get rid of that central20 ecu and get something adjustable.

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Changed over the fuel filter today, and it was filthy. As I shook out the excess, the fuel that came out was a really dark brown, yuck! Also changed the spark plugs and gave the air filer (pod) a bit of a clean.

Car seems to be running a fair bit smoother now, particularly on idle. Cant really tell if its drinking less yet, but will report back.

(Also changed windscreen wipers, easy another 10-20rw/kw now. :domokun:)

i get 25-35% more KM's from a tank on the fwy, with a 10yo O2 sensor... What oil are you using(my 25 loves Fuch's 10w30)? All filters done? Plugs gapped right? TIRE PRESSURES? i have mine at 40psi after a 2km drive then lower them for spirited driving to help tire wear/economey, that is on 225/50/16's.

I get about 400km's on my r34 before the fuel light comes on. Then when i fill up to the top i only seem to be puttin in around 50litres. I believe 34's have a 65litre tank? therefore when my fuel lights turns on i should still have around 15litres left.

Most driving is done in the city and i always seem to give it a bit here and there :D

I changed my 02 sensor recently.

Will be doing an oil change soon.

How much to replace fuel filter?

I get about 400km's on my r34 before the fuel light comes on. Then when i fill up to the top i only seem to be puttin in around 50litres. I believe 34's have a 65litre tank? therefore when my fuel lights turns on i should still have around 15litres left.

Most driving is done in the city and i always seem to give it a bit here and there :D

I changed my 02 sensor recently.

Will be doing an oil change soon.

How much to replace fuel filter?

less then $10 from supercheap

My tires are at 34psi all around, will pump them up to 38-40 and see how the fuel goes, not expecting much but you never know.

Also in the new year I plan to get an full road tune with a wideband, which I have been told will make a big difference in economy.

  • 3 weeks later...

My RB30DET is making a shade under 270rwkw and still gets 450km's to a tank (50L) with the odd squirt; no free way driving; all local 60-80km/h shortish (30km one way max) drives. Every time I accelerate off at the lights I'm always ahead of the traffic but not pushing it; only just slightly on to boost with light throttle and changing up at around 2500-3000rpm.

I had mine tuned for the o2 sensor on and now with it disabled; absolutely no difference to economy.

Maybe its the R33's VCT thing as R33's tend to suffer from bad fuel economy a hell of a lot.

Must suck to own an R33/RB25DET. >_< Sorry gotta rub it in. :dry:

Not mine Joel :D.

I get 400 - 450 km's to about 50 litres around town (400ish if I use the aircon a lot & drive it really hard). Fuel economy was terrible before I changed my O2 sensor which appeared to die from being removed from the stock dump & into the new one when I had my exhaust fitted. Was alright for a couple of weeks & then economy went out the window & the car was using about 15L/100km, after I changed the sensor it went down to under 12.

Another thing I've had cause my economy to drop was the thermostat, which when I pulled it out had a broken seal (standard 33 thermostats have a rubber seal to prevent any flow when cold). Never got up to temperature in winter & was chewing probably at least an extra 1 to 1.5 litres per 100 km from running too cold.

Cleaning the injectors I can personally vouch can make a big improvement if they are dirty. I used to do injector testing & sometimes when they'd come in they could be spraying a solid jet of fuel, which is no good for vapourisation. This would be an especially good idea if your fuel was rather dirty.

Pleanty of things to check.

Edited by J_Red33

^^ Yeah I was thinking the same thing about dirty injectors, and I've already purchased some S15 injectors which I'll install once cleaned and flowed.

I was going to get it all done this week, but after a light tap with a brick wall I have another thing to fix first.

I really like this thread because of stolen s15's avarter lol.

Seriously, does any 1 know what nissan's fuel economy claim was for the r33?? when you think about it tho, a turbo charged sports car with 4.11 diff ratios etc etc, having fuel economy around 12-13ltrs/100km isnt toooooooo bad.

then again if people are getting 500-550km out of a tank, i want to eat my left arm

I really like this thread because of stolen s15's avarter lol.

Seriously, does any 1 know what nissan's fuel economy claim was for the r33?? when you think about it tho, a turbo charged sports car with 4.11 diff ratios etc etc, having fuel economy around 12-13ltrs/100km isnt toooooooo bad.

then again if people are getting 500-550km out of a tank, i want to eat my left arm

I remember seeing specs a while back; it supposed to be around 10.5ltres per 100. My old rb20det used to get exactly that.

Yeah you just have to remember with that rating that's on a combined fuel cycle of city & highway driving.

Around town I chew no more than 12L per 100km as previously stated (got 11.73 on my fill today, & that was with the use of aircon), but if I do long country drives it'll hit the low 9's. Half way in between is about 10.5, so sounds about right :D

Edited by J_Red33

Well I dont think my coolant temp sensor is playing up because I can see the temp on my PFC controller, sits around 72deg after taking about 5 mins to warm up.

This weekend I'm going to get the car on a hoist and do an inspection of all the fuel tank/line area, even though RE customs has already checked this I'm almost at my wits end!

You still haven't had the road tune, and is your 72degrees correct????

Presuming your tuners haven't altered the PFc's settings, that means you'll be running between 5% and 10% rich on fuel.

Perhaps it needs a temp. sensor but the tuner should have picked that.

Useless "tuning" an ecu with incorrect inputs.

Edited by grigor

Cubes 72 degrees is too low? Damn! I do have a very large aftermarket aluminium radiator and breather tank setup, would that explain the lower temp?

Grigor just got back from holidays mate, trying to get the road tune sorted but I'm going to be installing bigger turbo/inj/afm soon so I dont want to do another tune (unless I can get it for free) just before I get the goodies in. Why would the 72deg be incorrect? Will have a check of the coolant sensor and give my tuner a call again.

Thanks for the help fellas, and keep the ideas coming.

Nick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...