Jump to content
SAU Community

Recommended Posts

I have a E6X if your intereted? not an E11v2 but the something to consider.

just out of curiousity, why would one choose an e11v2 over the e6x if they're only after a power goal of 250rwkw (eg high flow, 440cc injectors, fuel pump etc). i asked about haltech with my tuners and none of them mentioned the e6x for an r33 gtst. i checked the website, but i'm not very tech minded so i didn't really grasp the real benefits of the e11 :P

Edited by into oblivion
Link to comment
https://www.sau.com.au/forums/topic/196611-e11v2/#findComment-3524557
Share on other sites

this is why i need an e11v2

ok ive been building a tyre fryer for the last 8mths and seeing as its nearly done i thought id post up some pics and details of the build

single turbo

to4z 1.06 rear (will be going to a 1000hp turbo this is just a start and then going bigger)

wiseco pistons and rings

eagle 1400hp rods

hks 272 cams but using standard first up

acl race series bearings

arp head, main and rod bolts

Ajusa gasket kit with quad layer metal head gasket

fidanza cam gears

gates timing belt

unorthodox racing racing alloy crank pulley (450 grams compared to 4.5kgs)

alloy p/s, water pump and powersteer pump pulleys

mv automatics built 4spd 30-40le box with 3400 stall (same as 1jz747)

600x300x120mm gtr drag intercooler

custom 3inch cooler piping

samco silicon bends and joiners

pwr trans cooler

billet machine industries twin feed fuel rail

1000cc precision injectors

2 044 bosch fuel pumps

1 lift pump into my own design under car surge tank

speedflow fittings (about 30 all up)

single piece tailshaft

locked hiace diff with 31 spline standard toyta axles (as in shanes car and my mates hiace they are extemely strong)

haltech e11v2 ecu

boost, tacho, speedo, water temp and oil pressure gauges all brand new speco

eboost 2

made my own spaghetti manifold

turbosmart v port blowoff valve

48mm pro gate

4inch exhaust from turbo to back of the car

metal cat 5in cat with 4in inlet and outlet

b&m carbon fibre magnum grip shifter from the USA with a b&m cable

Edited by blo2.6
Link to comment
https://www.sau.com.au/forums/topic/196611-e11v2/#findComment-3525315
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It’s definitely an import, the Aussie ones have reflectors in the rear bar, it’s also a turbo which none of the Aussie one were.    I remember back in the day I want a twin turbo z32 so bad and then I saw a 32 gtr and that was the end of that lol 
    • Same can be said for Subarus motors ha ha!   I like the 300ZX, I nearly bought a Z32 before I bought my first Skyline. It was going to be a project. Then I found out there was a bit of a dodgy title with it... As in, someone attempted to commit insurance fraud with it and there was now some dodgy legalities around it. So at 18 I walked away from it.
    • The below is what the readings I had with the fuel pressure gauge which were correct. It seems like the issue is mainly during drive and not idle. I bought the new hanger hoping it could be the issue, perhaps I ruined something while cleaning, but I have not installed it yet since I have to wire up everything with the new plugs.
    • Actually, that's not entirely true. It's also the same motor in the 1st gen Nissan Cube but they're rare as hen's teeth.  
    • Yeah it is always worth testing and balancing actuators out of the box, just set the pressure regulator on a compressor very low (eg 5 psi) and increase it slowly to see when they both move.....unfortunately while you may be able to adjust the length of the actuator rod to minimise any difference, the actual pressure they move from is not adjustable so you need a well matched pair. And yes, the VCAM is probably contributing; the earlier in the rev range they come on boost and the slower the revs build (I think your demo was in 5th), the more you notice it.  Driving at WOT through 1st, 2nd, 3rd etc you will probably never hear it as any shuffling starts and is over super quickly
×
×
  • Create New...