Jump to content
SAU Community

I Need A 0.3mm Drill Bit.

SECURITY

By SECURITY,
in New South Wales

 Share

Recommended Posts

MZTRBO Experienced

MZTRBO

Posted
Posted

Try Bunnings?

Or a specialist tool shop. I got some things from a bolt shop in penrith that seemed to have alot of specialist tools. I think it was called bolt master. The place is right across from Race Solutions (HITMAN's).

Good luck on finding it..

And what is it for, as it will be a fairly minute hole.

Cheers

D

Pezhead Grand Master

Pezhead

Posted
Posted

Dick Smith's has a set with a .5 mm drill but that's the smallest I've seen in a retail store. 12 piece high speed PCB drill bits for small hobby applications. Sizes are 0.5, 0.8, 1.0, 1.2, and 1.5mm diameter. You may have to try a speciality machinist tool shop.

What are you trying to do? The drills get very brittle when they get down that small and you can't just stick them in a normal chuck.

MK2 Experienced

MK2

Posted
Posted

If it's only plastic you might be able to find a bit of piano wire in that gauge from a hobby store, heat it up with a blowtorch until its yellow and pierce it though.

Otherwise it's not going to be real easy, jewellery store supplies 'might' have something like that for metalwork too.

Lunatikk Rising Star

Lunatikk

Posted
Posted
Almost certain you could get one from Gasweld.

Yep, what you need are GAS drills. (calibrated accurately & small enough for gas/fuel jets etc)

Forget Dick Smith, Bunnings etc- that would be like going to a Woolies servo & expecting to find proper race fuel.......

DECIM8 Grand Master

DECIM8

Posted
Posted

Hey mate, You can get them in dremel packs of drill bits.. Would be slightly hard to use on a drill tho and a rotary tool or dremel spins quite quick..

but yeah rotary tools have those sizes.. bunnings in the dremel section

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...