Jump to content
SAU Community

Vortech's owner in troub, need urgent help: Where can you get an emission test in SA?

9krpm

By 9krpm,
in South Australia

 Share

Recommended Posts

9krpm Mentor

9krpm

Posted
Posted

A friend of mine is getting a Vortech SC kit for his car. He checked with registration who then referred him to Regency. :P

Regency requested a emission test result to be able to register the car!!!!! He has been quoted $4000 for the test in SA ;)

The kit on this car is exempted from emission control everywhere in the world. The kit has a placard attached to the supercharger stating so. The car is only 3 years old and set the world record for the lowest emission engine/exhaust system. Regency still would not register this car unless it has the test done in Australia.

What the hell is going on with the government? What is the fairness here? Does every car need a emission test if something is done to the car? Does LPG car need a emission test when LPG get installed?

Do you guys know of any other ways around this problem?

Could you guys tell me where Regency is and who work there?

Sil8ty Collaborator

Sil8ty

Posted
Posted

What car is it for?? I would suggest calling them, as most of the common kits have been EPA tested... Also speak with Tonkin and associates in Adelaide.. They are consulting engineers that i think do the testing for CAPA.. All you need to do, it the emmssions has been done on the kit by CAPA is to pass a noise test.. Not much at all $$$$...

9krpm Mentor

9krpm

Posted
  • Author
Posted
Originally posted by SR910

A full drive cycle emissions test at mitsubishi motors is just upwards for $4,000.

Yes, this is what my friend told me too.

Is there any other place that carry out the test as well? Doe Holden in Elizabeth do this test?

Sil8ty Collaborator

Sil8ty

Posted
Posted

I would just ring CAPA, as i had to go through this with my Powerdyne kit when i lived W.A. All you have to do is a noise test.. As the kit for the 5.0L is already Emmissions compliant..

What Vortech do you have Is it the V2 (silent Vortech) as the normal V-1 S Trim may not pass..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...