Jump to content
SAU Community

Recommended Posts

Hey ok i have a 1997 r33 which i bought as a shell which was in an electrical fire and is a repairible write-off, i have almost finished building it up but my daily driver is starting to die n needs some love and i dont have any spare cash to finish this.

Its almost finished being repaired, i had to completely replace all rear end parts tail lights, rear bar, boot, i put in an manual rb25de as i had it lying around, would be perfect for rb30det conversion, the shell was a turbo shell so has 5 stud 17X9's which need new tyres, i have replaced wiring looms but some wiring still needs to be done, complete dash, aircon, heater box was replaced, engine bay was stripped to bare metal and sprayed gloss black looks hot as,

Still needs front widscreen, front gaurds, headlights, clutch fan, and some air con bits if you want aircon,

front bar is gtr style but needs some fiberglass work, also needs full re-spray as its in 2 diff colours atm

Have bonnet but corners bent may be fixable i dont know

i have got urethane gear box mount, diff mounts and sway bar mounts, interia is immaculate condishon, body is very straight.

does need viv but i can provide a tax recept for the car with the work for ease of this.

Looking for $5700 will consider swaps for cheap turbo manual, r32,33,silvia, 180 ect with some cash ajustment, would concider including my daily with a swap 1990s auto pulsar q, needs t/belt waterpump n driveshaft boot with 11 months reg

Im in SE melb neer knox city

pm or msg me 0401011380

cheers Jarrod

post-21352-1197544711_thumb.jpg

post-21352-1197544782_thumb.jpg

post-21352-1197544856_thumb.jpg

PRICE DROP TO $5000

Now includes turbo conversion, walbro fuel pump, fuel pressure reg, thick alloy radiator, and black HKS front mount cooler kit

Also on ebay

Edited by unarmed_skyline
Link to comment
https://www.sau.com.au/forums/topic/197561-1997-project-r33/
Share on other sites

hey, i have all the parts sitting around minus intercooler, injectors and ecu, to convert this to turbo if anyone interested in that.

im working nights so can view most times.

cheers Jarrod

360 veiws and no interest?? i've got lots of spares for this car, if someone buys it this week ill throw some wide fiberglass fenders and mabye black hks front mount cooler kit with stock piping location, for $5000, would mean only things to get in on the road is headlights,clutch fan, windscreen and respray, and ecu, this combo made around 170kw at the wheels with only 5psi on r32 turbo with full boost by 1800rpm on microtech ecu, will consider selling with microtech for $6000.

I need this gone so i can repair my daily

oh forgot to saw got, walbro fuel pump and adj fuel pressure reg,

pics with gaurds and front mount

post-21352-1198128632_thumb.jpgpost-21352-1198128714_thumb.jpg

Edited by unarmed_skyline

hey Jarrod,

thanks. i dont think you should lower your price any more...$5000 is a fairly reasonable. you should try chuck it on ebay instead- pretty soon im going to do so myself.

cheers Marlon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...