Jump to content
SAU Community

Recommended Posts

I've never used a navman to compare but I am very happy with my tomtom.

had some problems in the maps (including it telling me to jump off the hume hwy at an overpass) but I think they all run the same maps

tomtom is easy and quick use, and has enough voices that i could choose one that didn't shit me. one problem is you must get the right suburb to grab a street - if you have the wrong suburb you will never get it. Eg Ryde is not enough you need West Ryde.

i had navman and now a tomtom they both have their good and bad points. main ones i have are

on the tomtom i cant seem to search for a road first have to give the suburb first

tomtom you can tell it to pick alternate route

navman has speed alert

tomtom dont display street number as you drive

tomtom you can put on celebrity voices

i found the poi not as good as navman

navman has speed alert

The new TomTom Go720 has speed alert now (not sure about the lower models). And speed / red light camera POI warnings.

I have a Go500. One of the more frustrating things is that sometimes, after entering the suburb and then the street...it sends you to the wrong street in the wrong suburb (even if it has the right suburb in brackets).

If you search for a cross street and then add your desired street as a crossing, it finds it.

f**king stupid.

The Go720 I got my old man for his birthday seems to be a lot better though. Faster to boot and acquire a location, better POI's. Since my Go500 is now a little broken, I might get a 720 or a One XL

How much at the Go720 going for at the moment? So it notifys you when there's a speed camera and a red light , that was one of the things i was looking for but thought i would have to get a navman , ive been doing alot of research and alot of people are saying the navmans seem to come back into the shop more then any other gps system and that they freeze alot..

look at Garmin as well.

You can plan your next days jobs and it will put them in most obvious order so you don't have to double back and forth etc.

my neighbour is a courier and he bought on of these.. he loves it.

I also have a garmin but I only use it for usual directions..

How much at the Go720 going for at the moment?

This is the cheapest I've seen.

Its got a lot of funky features (Bluetooth handsfree, can store MP3s so you can play them in-car...I think it transmits FM or something so you can pick it up with your stereo, it can display SMS' on screen and read them to you) which is why I ended up getting this for my old man. The screen's also a really nice, big, size.

I like the TomTom when I bought my GPS as the others were slower, had a less intuitive menu, and/or a smaller screen, but I haven't looked since I bought my Go500 a few years ago.

The 910's go for around 1,000$ mark don't have that at the moment so i guess i might take a closer look at the model below , the reason i asked this question is because alot of people i know told me navman's were freezing on them and theyve had nothing but bad problems with it..

I got the 910 its a good unit. 20gb hard drive to store mp3s etc. was expensive but good toy

it reads sms using text to speech, same way it reads street names. when it arrives it asks if you want the sms read out.

road racer, id be very hesitant about a navman. I work for harvey norman as a computer geek and the amount of problems i get with the new navmans i get are huge. Tom tom arent as bad as that but the best sat nav you can get are the garmin range, though they are more expensive. If you are familiar with the company GME Electrophone (they make the best UHF 2-way radios) they are garmin.

Just my input though, hope i could help

I have tomtom and its great. When you are buying a GPS its very important to check what GPS chipset it has. The best chip at at the moment is the SiRFstar III. There are a few chipsets that take very long to locate the satellites and loose signal when in a tunnel or in the city. Im pretty sure that most of the tomtom units have the SiRFstar III. Im not sure about navman.

-Phil

I've got a navman icn-520 .. absolutely love it.

My brother has tomtom running on his hp pda with an ebay gps receiver.. he loves that too.. i find it a little better in customising voices, poi etc. But the navman has it (in my opinion) in terms of ease of use and interface. but that's subjective. Both very strong competitors.. i'd take either of them over any other brand.

If you are familiar with the company GME Electrophone (they make the best UHF 2-way radios) they are garmin.

Not quite true, GME Electrophone are Australia distributors of Garmin, but Garmin is a company in its own right.

In my old job I dealt (and played) with Garmins all the time. they are the best on the market... but they are generally a little dearer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
×
×
  • Create New...