Jump to content
SAU Community

Recommended Posts

hey guys

as use all no r32s have shit lighting, no im not guna put a hid kit but im wondering bout the hid globes, you can use

http://cgi.ebay.com.au/H3C-EXTREME-SUPER-W...1QQcmdZViewItem

has any one got any experience with them??

or whats the best way to get to most light out of an r32 with out hid kit

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/
Share on other sites

hey guys

as use all no r32s have shit lighting, no im not guna put a hid kit but im wondering bout the hid globes, you can use

http://cgi.ebay.com.au/H3C-EXTREME-SUPER-W...1QQcmdZViewItem

has any one got any experience with them??

or whats the best way to get to most light out of an r32 with out hid kit

To my knowledge, if its HID.. then it must have a ballast, ignitor and the rest of it..

if it says HID globe, i reckon its just trying to draw attention to ppl that it might be "HID-like" but its actually just a white halogen bulb.

Just get some branded globes (eg philips, narva) with the proper rating to your stock bulbs

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3540408
Share on other sites

To my knowledge, if its HID.. then it must have a ballast, ignitor and the rest of it..

if it says HID globe, i reckon its just trying to draw attention to ppl that it might be "HID-like" but its actually just a white halogen bulb.

Just get some branded globes (eg philips, narva) with the proper rating to your stock bulbs

+1 to what he's saying, but I can't seem to get the eBay link to work.

I've got the cheap HID kits installed in my R32's projectors and I have to admit, they're shit. They produce much better lighting at night, but also quite a lot of glare and hot spots. I'd recommend getting some name brand globes.

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3541040
Share on other sites

Yeah, I agree too... I was thinking of getting a HID kit too... but with HID's - they will gradually get dimmer and then whitish yellowy after a while - also, too much glare... I'd recommend the Phillips Diamond Vision range - very nice clear white light and very durable would last you a couple of years, I'd say.

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3541383
Share on other sites

there not an proper xenon light they are gas filled halogen lights, iv tryed the best brands most expensive and the results wernt much better

Yep, I know what you mean mate. Next thing to do is get a retrofit all setup and ready to go. With what your car's gone through, you wouldn't want your car to have shit glary headlights. Retrofit it!

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3542238
Share on other sites

hey mate,

i went on ebay, to sought after a nice set of globes, after using the phillips blue ones, they were SHIT! rofl i found these.. i love them and they were cheaper!! only cost 30$ a pair made by KLS power spirit. the color is awsome :D rainbow man ay. a bit or red,green & blue even some yellow rolf hard to explain D:> but im am happy and recoomend these ones too bud

i got these LINK TO GLOBES @ EBAY

regards JEZ

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3543060
Share on other sites

hey mate,

i went on ebay, to sought after a nice set of globes, after using the phillips blue ones, they were SHIT! rofl i found these.. i love them and they were cheaper!! only cost 30$ a pair made by KLS power spirit. the color is awsome :) rainbow man ay. a bit or red,green & blue even some yellow rolf hard to explain D:> but im am happy and recoomend these ones too bud

i got these LINK TO GLOBES @ EBAY

regards JEZ

Hey 32JEZ, how do those ebay globes compare to Philip Diamond Range? Whiter, brighter?? Anyone else can vouch for these globes?

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...N:IT&ih=023

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3543588
Share on other sites

Didnt think the phillips ones came in a h3c, on other cars have run 6mm wire direct from the baterry via a relay helped quite a bit

Havn't tried it yet on the 32 but might have ta the stock lights are crap mine had raybrig? globes when I got it there pretty well known and xpensive

actually think they were pretty average but who knows how old they were?

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3544641
Share on other sites

i had splitfire ultra white globes 4300 i think? in my old onevia and f*k oaf it was a big difference from the standard sh*t

i could see heaps better at night and its not fully white but more white then yellow.

got it from hioctaneracing.com.au

try pm them to see if they have any left.

Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3545507
Share on other sites

Couldnt direct ya to a skyline one but there is one for doing it to a jeep :P

all pretty well much of a muchness would save some wear an tear on ya headlight switch too

as it is only triggering the lights not carrying any real load

http://go.jeep-xj.info/HowtoHeadlightLoom.htm

and have to agree with comments about limiting the wattage used have replaced my jeep lights with glass ones to run higher wattage 100/130's

have seen others melt toyota 4B lights using similar bulbs

Edited by noone
Link to comment
https://www.sau.com.au/forums/topic/198220-hid-globes/#findComment-3545576
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...