Jump to content
SAU Community

Recommended Posts

after spending thousands on my car stereo i was driving around yesturday with it up loud (35/40) and it just turned off.

i though it might have been one of the amps over heating but if that was the case then the sub should of still been going?

im hopings its the fuse at the back of my head deck?

both amps (soundstream 4 channel and pioneer mono) are not turning on at all!??

head deck is turning on playing cd's ect but no sound is comming through anywhere?

i have checked the fuses on the car (electric 1 and 2 and car audio).

any help would be great thanks

edit, i posted it here because the car audio section doesnt get as many readers

Edited by thorpe84
Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/
Share on other sites

do you have a fuse between the amps and the battery? check the fuse on the back of the head unit.

also check that your head unit's face is attached properly and you haven't accidentally muted it... yeah I know, stupid idea, but it could happen.

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546794
Share on other sites

yeah there is a big ass fuse between the battery and the amps, it is fine

i have a double din pioneer deck so the face doesnt come off

dont spose anyone would know the type of fuse it would take as i cant find the manual for it, and cbf driving around with my dash all over the place trying to buy the friggin thing, from memory its was a red blade fuse smaller then the ones that are in the car fusebox?

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546806
Share on other sites

Yeah those are the types... I always thought those were for the onboard amplifier though, someone correct me if I am wrong, but I have never actually blown a fuse in the back of a head unit...

Simplify everything, start with step one... Grab some power (with an inline fuse) and a remote wire from the headunit (if you have all external amps, and they won't turn on, it could very well be this) and run new wires to one amp and see if it turns on... If you can't make the amps turn on like that, I would start to worry...

just test stuff one by one...

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546814
Share on other sites

to be honest i have no idea when it comes to electronics, i have paid alot for all this shit to be installed into my car and im not confident enough to start f**king around with all the goodies, i would probly end up frying myself.

i know basic electronics but nothing too crash hot

i was thinking, because both amps arnt working it would have to be a power problem wouldnt it? grounding or something like that

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546847
Share on other sites

That or the remote wire... That tells them to turn on and off, if that got shafted and earthed out, it wouldn't be able to tell them to turn on...

Got any friends that can help you out with checking wires and stuff? You just need to run some extra wires to the amps to see if it is a wire problem... That's step one :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3546864
Share on other sites

was justs kimming thorugh the thread, does your head unit still turn on? get a test light or DMM, check for power at the thick power cable on the amp and the remote wire (little one next to power wire) on the amp, if both have power your amp(s) are gone (if the headunit doesnt turn on, there wont be power on the remote line)

the inline fuses may look alright, but make sure your getting power at the other end, same thing happened to a mate, fuse looked brand new, still wasnt passing power though

edit - there will also be a fuse under the dash somewhere (cant remember for R33's specifically) that supplies power to the headunit, try that one first if the unit isnt turning on

Edited by VB-
Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3547116
Share on other sites

The fuses used are pretty beafy, but when they go, the break can be quite small. I had the fuse go on mine, and by looking at it, you couldn't even tell. If you are getting a DMM you can test the fuse with that. Otherwise, I'd recommend buy a fuse and replace the current one. They are only a few dollars, so if it isn't the problem, it hasn't cost you much, but could save you money in the long run.

Link to comment
https://www.sau.com.au/forums/topic/198697-stereo-no-sound/#findComment-3547850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...