Jump to content
SAU Community

Recommended Posts

Hi all,

I decided to buy the Apexi power intake pod filter which set me back $180.00 for the complete kit which I thought was reasonable and then installed it on the weekend which was a breeze to do as most of you would already know.

What I would like to know from you other people out there is that for those of you that have fitted one of these pods, did you notice a slight decrease in power apart from the induction noise you get. I also know that your supposed to box the pod up to stop it from drawing hot air which I haven't done but is it maybe because it needs to be tuned for this type of filter?

Will it make it run richer as well?

Thanks guys,

Gianni

Link to comment
https://www.sau.com.au/forums/topic/19921-just-fitted-the-apexi-pod-filter/
Share on other sites

I got an Apexi pod and it seemed to offer slightly less power than when I had my friend's borrowed HKS pod on. But that was because of all the extra hot air it sucked in (the HKS pod kind of faces forwards and suchs in more air from the front) because once I put the cold air box in, it had more power than the HKS.

$180 is a good price. I got mine from Japan for less than that, but I kind of *cough*avoided*cough* customs.

The car doesn't need to be tuned for the pod/box, and it shouldn't run any richer than normal. Not enough to require tuning anyway, but an S-AFC or the like always helps.

Hi JimX,

thanks for your info, I'm thinking of getting a Power FC down the track for extra tuning ability but money is always a problem as most of you will agree on that one!

One thing I would really like to know is having the Apexi pod on rather than the standard air box, will you gain anymore power?

I'm thinking I should have gotten a dyno done before & after to see what the results would have been!

I don't know if pods offer more power than the standard air box because mine came with a pod and no box. In theory I guess they should, they have more surface area and a better shape for the intake.

I was a bit curious myself.. and had to take off my Blitz pod for an EPA. When I put the stock air box I noticed marketed less response and total power than with my pod with same 10psi boost, although my S-AFC, etc was not tuned for the box.

...mind you this was with unknown filter, so the results could vary

Thanks to all the reply's,

I think that down the track when I decide to do a bit more tuning like boost & power fc, the pod will pay off... hopefully. I'm just deciding weather I should leave it on for now? will I be using any more fuel with it on and no S-AFC or power fc? I'm sure someone did mention that putting a pod filter on will make it run richer...

who knows?

Thanks again guys....

How would it make your car run richer? If anything I would have thought that better airflow=leaner running, but either way the AFM works out how much air is coming in and adjusts the mixture accordingly.

Well, my car has a bit of a fuel problem anyway, but after fitting the pod I lost around 20K's. 30L gets me around 230k's.

The most obvious difference is the noise factor. You can actually hear the standard bov :rolleyes:

I couldn't tell you if it has made it any faster, but it feels like it comes on boost faster. Not a huge difference but a noticeable difference.

I don't have any stats to prove, but i believe i felt a difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...