Jump to content
SAU Community

Recommended Posts

I have the motor in and carbies ready to go. The mechanical pump of my L24 fits into the 260 but will this supply enough fuel, or do i need a holly blue & regulator. Is anyone else running a 260 or280 and what fuel set up are you using? Please send info.

Link to comment
https://www.sau.com.au/forums/topic/199568-260z-twin-2-sus-in-my-c210/
Share on other sites

Thanks for the generous offer ghostrider, I'm in Mandurah. Ph 08 95818997. 6.30 pm is a good time to ring. Again thanks Rick. I have a suspicion we're not in the same state, could be a long drive for a p/gauge.

Hey mate. I am running twin SU's on an L26 and my Peirburg electronic fuel pump is maintaining a steady PSI right through the rev range. While I am having plenty of other problems, the fuel pump isn't one of them.

Have also seen good results with the Japanese Toiko pumps or even the stock electronic fuel pump from the 280zx. Good luck with it.

Hey mate. I am running twin SU's on an L26 and my Peirburg electronic fuel pump is maintaining a steady PSI right through the rev range. While I am having plenty of other problems, the fuel pump isn't one of them.

Have also seen good results with the Japanese Toiko pumps or even the stock electronic fuel pump from the 280zx. Good luck with it.

Hi coupe72001 and thanks for the reply.

Just a couple more questions. With your Peirburg pump are you using a regulator or is it naturally about 6 psi, I've read that's about the optimum pressure.

Also do you have the mechanical pump still in the mix of things. ie tank--filter--elec pump--mech pump --regulator, carbs.

Finally does the Peirburg make much noise and is it like a holly blue meaning it has to be lower than tank or does it suck fuel rather than gravity feed. Sorry for so many questions but this is the last piece of the puzzle and currently I'm stumped regarding what setup to use. Thanks Ricky. One more thing, are you using the fuel return line?

Ok...

1. I had a regulator, but my fuel guy threw it out! Said it was unneccessary - which has probably proven to be true as the fuel PSI holds steady.

2. My electric fuel pump seemed to suck well, but to be on the safe side I mounted it below the fuel tank at the back of the car, so it is "pushing" rather than "sucking".

3. It's noisy as all hell, which is good because I know when it's broken and I like noisy cars anyway.

4. I am using the same fuel line setup as the stock setup... I think.

5. I threw out the stock fuel pump. Steal a block-off plate to cover the hole from an injected car without power-steering... (maybe a 280zx or an r30???) or buy a nice billet chrome one from ebay America.

Hope that helps. I can post a few pics of my carby setup if you'd like.

For the record can anyone confirm how many PSI of fuel flow would be needed to feed twin 2' SU's. I thought it was only 3-4.

Ok...

1. I had a regulator, but my fuel guy threw it out! Said it was unneccessary - which has probably proven to be true as the fuel PSI holds steady.

2. My electric fuel pump seemed to suck well, but to be on the safe side I mounted it below the fuel tank at the back of the car, so it is "pushing" rather than "sucking".

3. It's noisy as all hell, which is good because I know when it's broken and I like noisy cars anyway.

4. I am using the same fuel line setup as the stock setup... I think.

5. I threw out the stock fuel pump. Steal a block-off plate to cover the hole from an injected car without power-steering... (maybe a 280zx or an r30???) or buy a nice billet chrome one from ebay America.

Hope that helps. I can post a few pics of my carby setup if you'd like.

For the record can anyone confirm how many PSI of fuel flow would be needed to feed twin 2' SU's. I thought it was only 3-4.

Ok...

1. I had a regulator, but my fuel guy threw it out! Said it was unneccessary - which has probably proven to be true as the fuel PSI holds steady.

2. My electric fuel pump seemed to suck well, but to be on the safe side I mounted it below the fuel tank at the back of the car, so it is "pushing" rather than "sucking".

3. It's noisy as all hell, which is good because I know when it's broken and I like noisy cars anyway.

4. I am using the same fuel line setup as the stock setup... I think.

ithought it was only 3-4.

I'd certainly like to see some pics if it ain't a problem, and you didn't mention wether or not your using the return line.

So if your not using a regulator your pump must be a low psi 3-4 pump, maybe I should look it up on the net. Again thanks Ric. I've tried to put pics on with thread but must be doin something wrong.

I've had SU's and Webbers on L series engines before and I've only ever used the standard mechanical pump which I have been told by numerous carby tuners is more than adequate and with no pressure reg required. Is a bit more farking around with a leccy one too.

Cheers, Vaughan.

I've had SU's and Webbers on L series engines before and I've only ever used the standard mechanical pump which I have been told by numerous carby tuners is more than adequate and with no pressure reg required. Is a bit more farking around with a leccy one too.

Cheers, Vaughan.

Vaughan I believe your right in what you say as I've just finished reading about an hours worth of threads, mostly American. It seems plenty of people are running just mechanicals.

The only issue I have now and hopefully someone can tell me is, i had to use my L24s or C210 78 skyline mechanical pump as the 260 one was removed. I've been reading my workshop manwell and the L24 mechanical pump, pumps around the 80 ltrs per hour.

What I need to know is, is this close to what the 240z mechanical pump can do.

Yeh rick all will be good, I have interchanged L4 and L6 pumps from all versions and as far as I am aware they are all one and the same. Good old nissan interchangability.

Sweeeet, I think this is now confirmed and I'll lay it to rest, but of course i'll let you know how it goes in practise . Thanks for the confirmation and all registered threads, your help is a... well a big help.

Cheers Rick.

  • 2 weeks later...

Thanks Coupe72001.How's it going now, do you get good performance out of it?Are your S.U.'s 1.75 or 2'' and are they H.S series. Do you run a return line to the tank? Sorry about so many questions, just interested as mine is still a while away from running.

On the dizzy thread I've asked what induction you use,that's been answered thanks. I've just had some parts sent from England for my S.U's, got them off ebay and it took 6 days for delivery.Pretty good i thought. Cheers Ricky.

Hey Rick,

They are 2 inch from a Rover (most likely) and they are now going like the clappers. I had a poke around and it doesn't look like I use my fuel return anymore! I had forgotten that I disconnected it way back when I first swapped the carbys. I don't know if they are HS series or not, but if you tell me what to look for Ill find out.

Good work getting the carby bits promptly from the UK. I am learning to love ebay UK and US for getting some of the hard-to-find parts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...