Jump to content
SAU Community

Recommended Posts

Hi Guys,

I'm considering options for a system for a couple of cars at the moment and as part of my research I have been reading posts here and on other forums re quality systems.

Of course I know that sound quality is dependant on the music being listened to and personal preferences.

Now I consider myself as somewhat of an audiophile but doubt that a huge outlay is beneficial when ambient road and car driveline noise is taken into consideration.

I've had some fantastic systems demonstrated to me in cars whilst parked and was hugely impressed but once mobile most of the subtleties were lost to the engine and outside traffic noise.

So my question is if not looking for bragging rites and not interested in buying from boutique audio sellers why wouldn't a basic system provide a good sounding and economical system which will not invite thieves due to some way expensive gear on show.

What I consider a basic system would be something like:

Sony/Pioneer/Kenwood MP3/WMA/CD/aux in RCA out 40wRmsx4 Head unit around $250,

Sony/Pioneer/Kenwood 6.5" 3 or 4 way door & parcel shelf, around $100 per pair,

Sony/Pioneer/Kenwood 12" sub 300watt nom (100watt Rms?) around $100,

Sony/Pioneer/Kenwood 300 Watt Nom (100Watt Rms) sub amp. around $200.

I have put a few systems in such as this but with 6 x 9's in the parcel shelf and the sound has been in my opinion good for the outlay.

I know that you get what you pay for but I want to be realistic and don't consider a 5% improvement for a 150% price difference value for money.

So what do you guys think?

Edited by son's slave
Link to comment
https://www.sau.com.au/forums/topic/199711-quality-level-relevance/
Share on other sites

Hi Guys,

I'm considering options for a system for a couple of cars at the moment and as part of my research I have been reading posts here and on other forums re quality systems.

Of course I know that sound quality is dependant on the music being listened to and personal preferences.

Now I consider myself as somewhat of an audiophile but doubt that a huge outlay is beneficial when ambient road and car driveline noise is taken into consideration.

I've had some fantastic systems demonstrated to me in cars whilst parked and was hugely impressed but once mobile most of the subtleties were lost to the engine and outside traffic noise.

you are correct. a system that sounds amazazing while parked will not sound as good while driving. things like subbass will be drowned out, cancelled by road noise, highs will be affected due to wind, etc. these cars however all have exstensive sound deadening done to them, so these things possibly affecting the sound wont be as large as other cars. you say you want quality, but obviously if you ware worried, and reading on further in your post arent going to "boutique" audio stores, and are only looking at entry/common brands, then any issue wont matter. in your case, all you want is something to listen to. so there isnt much point taking alot of effort worrying about such issues.

So my question is if not looking for bragging rites and not interested in buying from boutique audio sellers why wouldn't a basic system provide a good sounding and economical system which will not invite thieves due to some way expensive gear on show.

a baisc system will provide basic sound. a high end system will have better sound no matter what, even when driving. once again, personal preference at what you need.

What I consider a basic system would be something like:

Sony/Pioneer/Kenwood MP3/WMA/CD/aux in RCA out 40wRmsx4 Head unit around $250,

Sony/Pioneer/Kenwood 6.5" 3 or 4 way door & parcel shelf, around $100 per pair,

Sony/Pioneer/Kenwood 12" sub 300watt nom (100watt Rms?) around $100,

Sony/Pioneer/Kenwood 300 Watt Nom (100Watt Rms) sub amp. around $200.

you need to keep in mind that when a manufacturing puts the power rating on a headunit (40 watt, 50 watt etc) these are not rms ratings. they are max ratings. a headunit will put out 15wrms if youre lucky.

when you say "6.5 inch 3 or 4 way" basically, you are stating that you want to buy a 6.5 inch speaker, with a coaxially mounted tweeter, and one or two extra peices of plastic, moulded in teh vague shape of a speaker. these extra "mini tweeters" dont do anything, except suck in teens who think that having as many speakers in one unit is the best. you are best to look at either a simple 2 way coaxial, or 2 way splits(tweeter is split from mid driver)

id like to suggest a few changes though. personally., id spend about 150-200 ont eh front speakers, and 100 on teh rear. you sit in teh front, not the back, and any passengers can just put up with the slightly, but very unnoticble difference. generally splits in teh front, coxials in the back is a good thing to do.

id also amplify the front speakers. as i said before, the headunit will put out 15wrms, tops. to help overcome road noise etc, and get decent sound, its best to amplify them. what you can do in your case is get a 4 channel amp, have the front speakers running off the first two chans, then bridge 3+4 for the sub. budget about 300 for this, to get a decent thing.

dont forget also to add the cost of a wiring kit ($50) and a sub box, prefab ($100) or make it yourself, which wil cost you the wood, and screws/glue/carpet.

you are correct. a system that sounds amazazing while parked will not sound as good while driving. things like subbass will be drowned out, cancelled by road noise, highs will be affected due to wind, etc. these cars however all have exstensive sound deadening done to them, so these things possibly affecting the sound wont be as large as other cars. you say you want quality, but obviously if you ware worried, and reading on further in your post arent going to "boutique" audio stores, and are only looking at entry/common brands, then any issue wont matter. in your case, all you want is something to listen to. so there isnt much point taking alot of effort worrying about such issues.

a baisc system will provide basic sound. a high end system will have better sound no matter what, even when driving. once again, personal preference at what you need.

you need to keep in mind that when a manufacturing puts the power rating on a headunit (40 watt, 50 watt etc) these are not rms ratings. they are max ratings. a headunit will put out 15wrms if youre lucky.

when you say "6.5 inch 3 or 4 way" basically, you are stating that you want to buy a 6.5 inch speaker, with a coaxially mounted tweeter, and one or two extra peices of plastic, moulded in teh vague shape of a speaker. these extra "mini tweeters" dont do anything, except suck in teens who think that having as many speakers in one unit is the best. you are best to look at either a simple 2 way coaxial, or 2 way splits(tweeter is split from mid driver)

id like to suggest a few changes though. personally., id spend about 150-200 ont eh front speakers, and 100 on teh rear. you sit in teh front, not the back, and any passengers can just put up with the slightly, but very unnoticble difference. generally splits in teh front, coxials in the back is a good thing to do.

id also amplify the front speakers. as i said before, the headunit will put out 15wrms, tops. to help overcome road noise etc, and get decent sound, its best to amplify them. what you can do in your case is get a 4 channel amp, have the front speakers running off the first two chans, then bridge 3+4 for the sub. budget about 300 for this, to get a decent thing.

dont forget also to add the cost of a wiring kit ($50) and a sub box, prefab ($100) or make it yourself, which wil cost you the wood, and screws/glue/carpet.

Thanks for your reply Matt,

I've taken on board all you have said so my plan would be to get a pair of splits for the front, some 2 way co-ax's for the rear and a 4 Ch amp.

Due to change of one car and an additional 2nd car I am putting 2 systems together and I already have Kenwood subs in factory enclosures and two 2 ch amps. (currently used for driving the subs).

So to avoid buying 2 new amps would it be practical to use the current 2 separate amps to drive (1 front splits) and (2 the sub) and then buy another 4 Ch amp for the second car??

And would it be necessary to buy a head unit with RCA stereo plus sub out (3 outputs) or would the front splits be driven from the speaker outputs?

I've also been looking at sound deadening material and it appears quite expensive so keeping my original post in mind would it be economical and beneficial using these basic components?

Thanks.

So to avoid buying 2 new amps would it be practical to use the current 2 separate amps to drive (1 front splits) and (2 the sub) and then buy another 4 Ch amp for the second car??

Indeed it would.

And would it be necessary to buy a head unit with RCA stereo plus sub out (3 outputs) or would the front splits be driven from the speaker outputs?

No thats correct, you would need to buy a headunit that has either 3 outputs, or, some will have only 2, but the 2nd set can be switched between either rear, or subwoofer. Keep this in mind when looking.

I've also been looking at sound deadening material and it appears quite expensive so keeping my original post in mind would it be economical and beneficial using these basic components?

Thanks.

It would provide sound that, given proper installation, would be better than stock. If you find this to be beneficial, then its perfect for your needs, without going to the next step of adding sound deadener.

Just a side note.... Mp3 will severly affect the quality of sound.

CD is best. Always will be. With a new quality set up you will notice many differences in music quality over the years. Most new (06 onwards) releases have great audio range due to the quality of EQ / Compression / expansion and Harmonising tools used in the Sound recording. Now that most music studio's have the capability of recording in HD 96K the sound is just fantastic and shows (even when scaled back to fit the standard 44.1 cd)

I laugh when people spend all this money on a (fully hectic) set up and then start playing an mp3 disc (cause it holds 300 songs bro)!!

just my 2c

Loz

Thanks again for your replies guys,

Would likely be playing CD's most of the time but have a bunch of single MP3 tracks as some albums are not worth buying if there's only 1 or 2 tracks that apeal so for those I have MP3's.

Will do more research!!!!

  • 1 month later...

Dont limit urself to sony/pioneer/kenwood. There are better out there, and i do NOT mean alpine eclipse etc. Try JBL as a brand. They dont do head units, pick up a decent kenwood or sony, but as far as speakers and amps and subs go, they are hard to beat for the money it looks like your willing to spend.

Wander into a store and have a listen, compared to other offerings around the same price. Guarantee youll walk away from the three brands you mentioned.

Also try MTX.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...