Jump to content
SAU Community

Recommended Posts

i have a S2 R33 for vehicle reference.....:i tried a pod and it made my car more unresponsive....like it had a bit of room on the accelerator that made no effect.(dont know how else to explain it)...also had some huge suction noise which i wasnt a fan of....but i did have the flutter i was after.....

could of the problem with the pod been that the connect to the AFM was not completely airsealed tight or something..or does this happen normally by making it less responsie?...any advice or answers would be awesome!

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/
Share on other sites

so its the hot air makin the suction noise really loud and it is also makin it unresponsive?

is that what ur tryin to say?

The Air is making the noise... the fact that its hot is irrelevant

The fact that it is hot has other meaning... hot intake temps = slower car.

So put the airbox on with a good panel filter, best thing for the car... you just dont get noise.

But that can be countered by sticking your head out the window and whistling if you want, it pulls chicks all the time

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3565026
Share on other sites

The Air is making the noise... the fact that its hot is irrelevant

The fact that it is hot has other meaning... hot intake temps = slower car.

So put the airbox on with a good panel filter, best thing for the car... you just dont get noise.

But that can be countered by sticking your head out the window and whistling if you want, it pulls chicks all the time

unlike u mate i dont need to do anything to attract them...:)

jus jks but i had to post it....lol

DONT TAKE IT TO HEART...

cheers for the advice tho!

if u dont like the pod sound, get a k&n panal filter and use the stock airbox.

when my 33 had this setup boosted @ 12psi i got a nice whistling sound from the panal filter.

its not really the 'pod sound' i dont like....it like it as then i get a bit of 'flutter'...because BOV's are defectable i get the chopping noise which i like better than a huge psscchhhhtt!

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3565207
Share on other sites

since this a pod thread thought id ask my question here......

i got a cone shapped pod on my rb20 like the k and n shapped 1s, but most skyline have the mushroom/dome shaped filters, are they better then the cone or is just preferance n wat fits in the motor?

Most people would agree that the mushroom/dome shaped filters, which are normally foam filters, are worse than the paper/cotton style filters. Perhaps better flow, but they're very lacking in filtration and have a habit of coming apart and with bits of foam getting sucked into your engine if you don't replace them often enough.

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3573123
Share on other sites

ook ok cool lol i guess ill keep the cone 1 in that case............ do the foam ones give off a different note cause my pod makes a annoying whisteling sound

Box it. This is just because the pod filter isn't muffling the noise of the turbo like the stock air box would

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3574564
Share on other sites

its not really the 'pod sound' i dont like....it like it as then i get a bit of 'flutter'...because BOV's are defectable

Whether unboxed pod filters are defectable or not (and I've heard arguments on both sides), the cops will assume it is defectable and issue you with a notice anyway.

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3574741
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...