Jump to content
SAU Community

Recommended Posts

Ok this is mostly for guys who have rb25 hiflows on there rb20s

I put this turbo on the weekend, everything seems ok, smooth boost throught the rev range and i can feel the difference in top end yadda yadda. But why when i snap it from first to 2nd it just bogs down and has to build boost again, there is no wheelspin. I dont know maybe i was expecting too much.. id like to here others opinons. Mtq hiflowed the turbo.. but s**t it seems real laggy. The only thing i can think of why its laggy is the rb20 elbow is still on there temporarly?

Experiances is all im really after.

Cheers

Raz

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/
Share on other sites

Supporting mods really,

Full 3" exhuast with open style dump pipe(not split)

Apexi pod

Hks evc

hybrid copy front mount.

safc2

gtr fuel pump

std injector and afm.

made 237rwhp with the std turbo..

Cheers

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568425
Share on other sites

well when you change any turbo in your car. it must be tuned.

when i put my hiflow on it was the same. dont worry about it. tune it and you will see the difference.

post up your results with the MTQ hiflow too. would be interesting to see when its done.

cheers

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568431
Share on other sites

A standard RB25 turbo on my old 20 was laggy.. a hiflow will be even more so.

+1 get it tuned, they will be able to wind some timing into the offboost areas and get it spooling sooner.

Also, what boost controller are you running if any?

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568467
Share on other sites

Its going in next week as my dyno man is currently moving his dyno into his new shop, he said he will sort me out, he is usually right.. lol.

you have an rb25 im guessing? wonder what the rpm difference is usually in comparison to rb20? when were you seeing boost before and after tune.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568469
Share on other sites

Not sure about those controllers, mine has a feature to hold the gate shut till a certain pressure (in my case I have it set to 9psi) which helps spooling.

So you can compare, when I had the standard 25 turbo on my 20 it would start spooling about 2500, make full boost (12psi) by 3500rpm and max power about 6500rpm. That was all untuned.

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568489
Share on other sites

Common problem . What happens is that the engine can now breathe out more easily and will improve its combustion efficiency via better scavanging .

I'd be looking at ways to increase its light load ignition advance whilst maintaining appropriate AFR's .

I went from an RB20 BB turbo to the GT2860Rs on the old FJ20 2L 4 and the extra timing that it could then take was amazing , so were the results .

Cheers , A .

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568540
Share on other sites

You need to be able to advance the ignition ONLY in the areas where it's not seeing boost anymore, i.e. the stock ecu will be expecting to see a whole bunch of air under pressure between 2000-3000rpm which just isn't there anymore with the bigger turbo.

It's not just a case of turn the CAS to get more advance, you need a custom tune, I had my stock 32 ecu remapped to suit my new engine :blush:

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568755
Share on other sites

SITC's can help with the ign timing, and bring on boost a bit lower in the rpm

sitc + safc2 isnt a bad mix, add in a z32 afm (seeing you have a highflow turbo, it'll suck way more air in thru the afm) and you can get a good tune going

seeing you have a manual tho, why not get the ECU remapped and then use the safc to simply make minor adjustments to the ROM tune

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568766
Share on other sites

As above.. SAFC + ITC is for the lazy people with bad knees and can't operate the left foot so drive auto tanks. :blush:

sell the SAFC and with the money, you could have a chip for your ecu that will give better results all over the rev range.

The Hi flow RB25 turbo on an RB20 is a pretty common route.

User on here called CEFFIE made 240rwkw @ 19psi on his setup remapping his stock ecu.

And everything looked stock.

have a chat with him

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3568803
Share on other sites

SAFC is for fuel adjustments.

ITC or SITC is for timing adjustments.

But it's crap.

there are 5 points at which you can make changes (if I recall)

where as a remap can have timing changes at ALOT more points in the rev range.

AND, it is programming the actual computer's own programs rather then "tricking" it via a singal bender like the SAFC is.

Link to comment
https://www.sau.com.au/forums/topic/200608-boggy-mc-bog/#findComment-3569373
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...