Jump to content
SAU Community

Recommended Posts

Hey mate good too read your progresss I just pasted the year mark with my build, hoping to have it all together in the next month.

I went the funny option of building a RB24 some of the mods I am doing are:

Forged Eagle Rods

Rb26 Crank + Balanced

ACL Race Series Bearings

ARP head studs

ROSS Custom 83mm pistons

Tomei 1.5mm metal head gasket 83mm

1mm Oversize valves

Tomei Solid lifters

Tomei Valve Springs

Tomei 270 9.25mm lift Cam's

Tomei Shims

HKS Cam gears

Ported and polished head

Garrett 3076R .64 rear

Hopeing for easy 300kw on low boost and around 350 - 400rwkw on high boost around the 30psi mark which i hope should be achieved with this turbo or having to change to a larger rear housing.

Anyway goodluck today with the car at the workshop!! keep us updated

sounds pretty good mate. can i come around and harvest from your money tree? hahahaha. i would love to have some of those parts you have

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3600250
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

well its lookin better now. i got them to check the plugs and they were shitty bosch items, so they have been replaced with decent ones. and they took off the CAS to find it was screwed, chewed out on the inside. totally unexplainable and weird. so a new one is arriving in the morning and i should have it back tomorrow.

the dodgy CAS might explain a weird flat spot i had between 3000-5500 rpm when i had the std ecu. happy days ahead :)

w00t!! good news!!! get that bish screaming.

Hey mate good too read your progresss I just pasted the year mark with my build, hoping to have it all together in the next month.

I went the funny option of building a RB24 some of the mods I am doing are:

Forged Eagle Rods

Rb26 Crank + Balanced

ACL Race Series Bearings

ARP head studs

ROSS Custom 83mm pistons

Tomei 1.5mm metal head gasket 83mm

1mm Oversize valves

Tomei Solid lifters

Tomei Valve Springs

Tomei 270 9.25mm lift Cam's

Tomei Shims

HKS Cam gears

Ported and polished head

Garrett 3076R .64 rear

Hopeing for easy 300kw on low boost and around 350 - 400rwkw on high boost around the 30psi mark which i hope should be achieved with this turbo or having to change to a larger rear housing.

Anyway goodluck today with the car at the workshop!! keep us updated

nice!! i was thinking of doing this rb24 as well, but i decided against it and go for a 25. nice mod though...mine isnt that crazy.

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3600534
Share on other sites

Got my GTR tuned by mercury motorsports.

Made 220awkw on 15psi

FMIC

power fc

700cc sard injectors

full trust 3" zorst

500hp fuel pump

splitfire coils

stock internals/cams

stock turbos

and a real dodgy compliance catalytic converter ( thats now melted)

with the cat done Trent said id get a fair bit more power

I need to fix some things on it before any more power mods

after fixin it up im goin for cams and new turbos

hoping for 300+awkw

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3600643
Share on other sites

Got my GTR tuned by mercury motorsports.

Made 220awkw on 15psi

FMIC

power fc

700cc sard injectors

full trust 3" zorst

500hp fuel pump

splitfire coils

stock internals/cams

stock turbos

and a real dodgy compliance catalytic converter ( thats now melted)

with the cat done Trent said id get a fair bit more power

I need to fix some things on it before any more power mods

after fixin it up im goin for cams and new turbos

hoping for 300+awkw

you shouldnt have any dramas getting that with uprated turbos and cams i reckon

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3600707
Share on other sites

you shouldnt have any dramas getting that with uprated turbos and cams i reckon

you can do 300awkw with standard engine, standard cams.....just upgraded turbos, computer, injectors, afm's and fuel pump. So he should be all hunky dory with that.

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3601159
Share on other sites

well picked the car up. still not finished yet. they could still only tune it on 10psi as when they turned the boost up it didnt make any difference co0s the exhaust is restricting it. i think it is the cat for sure as it looks about a million yrs old and is prob full of shit from when the exhaust wheel on the stock turbo decintegrated and went flying down the dump pipe into it. going to try and score a hi-flow from somewhere today and fit it tomorrow morning

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3602587
Share on other sites

Get a drill and swiss cheese the cat. then smash the farken substrate out with a broomstick. that'll clear that restriction :)

Had my car with standard ecu at 216awkw and the cat never had a problem. As soon as i power fc'd it up to 220awkw the cat temp light started comin on. now whenever i get up it it comes on so mines fried.

And its not the power fc knock warning cos it doesnt do the 1/2 second on/off, it stays on while it revs down and then goes out after a coupe of seconds. Dodgy ADR compliant piece of sh#t

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3603003
Share on other sites

Yeah the parts that make the "greenies" happy are usually the first to go when you wanta make solid power...

However that said, id never suggest to smash out the insides of a cat as its just a good excuss for a shaker unit to defect your car and issue you a fine...

The fines are worth more than a decent cat, just get a good quality one and you wont have a problem...

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3603998
Share on other sites

yeh i think im gonna get a CES hi-flow cat. i had a quick play this morning and the car is pulling better now, so im gonna get a good hi-flow to keep it legal. im also thinking of replacing the current system from the cat back. at the moment it goes from the cat into a muffler, which then splits into twin 2 1/4(or 2 1/2) pipes back to 2 small mufflers/cannons at the back. thinkin maybe a good 3.5inch system from cat back would be better, or just getting rid of the muffler between cat and rear mufflers. what do you guys reckon?

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3606105
Share on other sites

yeh i think im gonna get a CES hi-flow cat. i had a quick play this morning and the car is pulling better now, so im gonna get a good hi-flow to keep it legal. im also thinking of replacing the current system from the cat back. at the moment it goes from the cat into a muffler, which then splits into twin 2 1/4(or 2 1/2) pipes back to 2 small mufflers/cannons at the back. thinkin maybe a good 3.5inch system from cat back would be better, or just getting rid of the muffler between cat and rear mufflers. what do you guys reckon?

Just dont defected for having a 3.5inch pipe to close to the ground ( minimum 100mm).I had this and had to go back to a 3inch.

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3606127
Share on other sites

I had a 3" all the way through, it was more than happy to flow 330+rwkw

So with your goals in mind 3" would be fine ;)

Due to material cost the 3" will be cheaper also...

Jack B @ Redcliffe did mine for $800 inc high flow cat through to a canon, then a further $240 for the new dump pipe and wategate dump when i went to a high mount setup...

They spent a solid 3 hours doing my dump pipes and joining it into the old system in the most efficent manner, I was extreamlly happy with the price after seeing the quality of work...

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3606193
Share on other sites

  • 2 weeks later...

the old CAS was destroyed, and the one they put in as a replacement is also buggered, it randomly makes this hardcore knocking noise. i have driven the car about 70km since picking it up. as the oil feed line is leaking again, i need to get a 90deg bend made up to get it away from the manifold.

on top of this i now dont have a license for 8 months as of today :( . so you'll be seeing my car in the sale section on here shortly, as well as being advertised on other websites :D

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3625438
Share on other sites

the old CAS was destroyed, and the one they put in as a replacement is also buggered, it randomly makes this hardcore knocking noise. i have driven the car about 70km since picking it up. as the oil feed line is leaking again, i need to get a 90deg bend made up to get it away from the manifold.

on top of this i now dont have a license for 8 months as of today :stupid: . so you'll be seeing my car in the sale section on here shortly, as well as being advertised on other websites :unsure:

:) dude!!! :domokun: lol how could you?!?!?!

I love it when i read ppls builds, ahhhh the money pits....

I'm glad I built my last car. I hope....

yes the joys >_<

just wish mine would be finished already.

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3626809
Share on other sites

:) dude!!! :) lol how could you?!?!?!

yes the joys :P

well it wasnt from hooning so im happy about that. however this doesnt mean it wasnt something stupid. but hey, thats life. sell up, start again at the end of the year on something newer and better

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3627398
Share on other sites

well it wasnt from hooning so im happy about that. however this doesnt mean it wasnt something stupid. but hey, thats life. sell up, start again at the end of the year on something newer and better

thats true bud, best o luck selling it and with the time off.

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3627460
Share on other sites

haha geez wasnt really expecting that after reading through the thread. Seemed like a hell of a lot of work you had to go through just to get things happening, so many problems! Maybe it was time to cut your losses any way and start fresh.

Link to comment
https://www.sau.com.au/forums/topic/200696-excited/page/3/#findComment-3630323
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...