Jump to content
SAU Community

Recommended Posts

Hey guys. I have an R32 with an RB20det engine. When the car has just about reached its normal temp after driving for a few minutes the idle plays up. For example when i pull up at lights i notice it being erratic. Anyone know what the problem could be? Thnaks peeps.

Link to comment
https://www.sau.com.au/forums/topic/201360-erratic-idle-on-rb20/
Share on other sites

mine has the same issue, thought it might be the afm, since when it was on cold start he was fine, no such luck though. lately in hot weather he's been sitting fast at 1200 for no good reason, not a boost leak either. *shrugs*

he still does it occasionally, but a little heel/toe here and there stops the rare conking out ;)

might try the IAC myself, thanks Wheezy :D

Thanks guys ill give these ideas a go when i get a chance. Its just weird that it only does it before it reaches its regular tempreature. Once it has warmed up it doesn't do it anymore. Ill let ya know if these suggestions work. Thanks

ive got a mate with the same problem - identical to what you said

funnily enough we put an rb20 ap eng powerfc in his car on thursday night and it fixed his idle

he also had starting problems, it would never start with the stock ecu, he had to almost flood it (carby style) to make it start

it started first crank with the powerfc

let us know if you find somthing

My mates does the same thing... Just always assumed it was the TPS. Im guessing the IAC and TPS could be the same thing >_<

TPS = Throttle Position Sensor

IAC = Idle Air Controller (also called AAC valve, Auxillary Air Control valve)

I would say it would be the IAC, you need to remove it from the inlet manifold, pull it apart and give it a good clean. It will be full of old soot and oily gunk.

If it was idling funny all the time I would suggest checking the TPS.

Edited by daisu
  • 1 month later...

Hey guys i cleaned the IAC and its all sweet thanks heaps!

ive got a mate with the same problem - identical to what you said

funnily enough we put an rb20 ap eng powerfc in his car on thursday night and it fixed his idle

he also had starting problems, it would never start with the stock ecu, he had to almost flood it (carby style) to make it start

it started first crank with the powerfc

let us know if you find somthing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...