Jump to content
SAU Community

Recommended Posts

hey everyone, decided its come to a time to move on as iv fell in love with another car but for people who dont know i built this from ground up,

item: r32 gtst skyline

location: brisbane

body has done 118,000kms motor has done 90,000

RB20DET - 5 Speed Manual

Chipped ECU

GTR front mount

Exeddy heavy duty clutch

AFM

Steel intake piping

Pod filter

Bleed valve

3 inch stainless dump pipe with screamer

3 inch front pipe

3 1/2 straight pipe

Eibach Potenza coilovers front 11kg

Kyb springs in rear

D-Project adjustable castor rods

D-Project adjustable camber arms

Greddy catch can

Hicas lockbar

GTR fuel pump

Short shifter

Standard LSD

Cusco front strut brace

HKS Super sequential blow off vave

Bride seat (will come with, for right price)

Fire extinguisher

Defi boost gauge

GTR steering wheel

Turbo timer

Stripped interior and sound deadening

Safety 21 6 Point Roll cage (side intrusion bars not fitted but will be included)

Standard Gtst Front bar,skirts and pods

Flared front guards

Paint : Matt black

Spoiler removed

Black Drift Teks +25 offset 17 x 9

Steer Tyres: Intensa Sava's 235/45/17

and a pair of stocko r33's

bad bits:

-speedo cable broke about 500 - 1000km ago

- paint and panel isnt the best

does not come with rego or rwc....

10k!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ONO!!!!!!!!!!!!!!!

no low ballers please

PM ME !!!!!!!!!!!!!!!!!!

PLEASE NOTE THESE PICTURES ARE FROM A MONTH OR TWO AGO CAR SITS ALOT LOWER NOW AND HAS DIFFERENT RIMS

any more pics just ask

Copyofuntitled.jpg

100_0638.jpg

100_0594.jpg

thanks

josh

Link to comment
https://www.sau.com.au/forums/topic/201525-r32-skyline-4-saleswap/
Share on other sites

OMG. This car is so shit.... I say that ONLY because I love it and I don't want Josh to sell it :D Gonna miss seeing it everyday up the street :P Sounds phat with straight pipe, screamer & SSQ BOV. Slides nicely too :(

Good luck with the sale man, and whoever buys this is getting one very phat pig :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...