Jump to content
SAU Community

Speaker Whine Question

SuperJohn

By SuperJohn,
in Car Audio & Electrical

 Share

Recommended Posts

SuperJohn Rookie

SuperJohn

Posted
Posted

I have the high pitched whining noise in my speakers, which as I've seen on the forums, alot of people seem to have. The difference is though my stereo was working fine for about 6 months, then I was driving along one day and went over a bump in the road which caused the car to jolt pretty hard, then straight after that the speakers started to whine, so loud I thought I was going to go deaf!

Anyway my setup: 4 speakers run off amp, RCA's one side of the car, power the other side, kicker amp in the boot. Front kicker splits have cross overs.

I was hoping someone might have an idea what could cause this to happen from a sudden jolt to the car, might help point me in the right direction to find the solution. I also rechecked all the grounds tonight too, something interesting is that when I didnt have the headunit grounded, but turned the car on (so the headunit DIDNT turn on) I still heard whine through all the speakers.

Any help would be massively appreciated.

Link to comment
https://www.sau.com.au/forums/topic/201678-speaker-whine-question/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Last Phantom
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Last Phantom · Posted

      I found a supplier for an arm in NZ. https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-rh-side?srsltid=AfmBOopMdfCFDc_8yVZZ9kq5nIngPHRTBzUU8v4SAptJaRO52Wjs0bC6 I looked closely at the photo of that one and the Z1 arm, and it's the same bloody arm. Scratches all match in the photo 😂 How hard is it to change that joint? Also they seem to be listing two options https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-balljoint-rh-side?_pos=1&_sid=229acde44&_ss=r And now I have no idea what size I'd need yay
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Ill review it again, from memory when I first saw some of Trailer Park Boys I wasn't a huge fan. I ended up at Letter Kenny after watching Shoresy, which is a bit ass backward, ha ha
    • Duncan
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Duncan · Posted

      "lol dunno" either But like you, I can't see any reason they would need to be different LHD to RHD
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I agree with you WRT the hard top. MX5's may be one of the better looking soft tops but I cannot think of ANY car, EVER that looks better with a soft top vs a hard top (or a designed roof). At all, ever. I also feel this way about the C5 Vette, the Z06 looks horrible compared to it's original form, it has an exaggerated version of the differences you're talking about.  
    • Last Phantom
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Last Phantom · Posted

      Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
×
×
  • Create New...